Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

workshop rebuild finally starting

Posts

workshop rebuild finally starting

#1

workshop rebuild finally starting

john lucas

The guys working on my garage are finally getting to the last stages. They are at least to the point that I can start moving things out of the existing garage that will become my workshop.

I started working on the "workshop" that is attached to the existing garage. I ripped out all the old cabinets. I may keep the two in the photo and might redo the workbench and keep it. This room is 11x23 and will become my metal working building as well as my finishing and surface decoration room. I want to keep that room dust free. I'm going to build a down draft table to do a lot of the surface carving. The big dusty carving will be done in the attached garage which will become the main both areas will be heated with gas heat. Air conditioning will have to wait.

Hope to start on the electricity and insulation in a week or so. then things will really get moving.


Re: workshop rebuild finally starting

#2

Gonna be awesome!


Re: workshop rebuild finally starting

#3

Re: workshop rebuild finally starting

Roger Chandler

John, I hope you will post some pics when you get it all done and set up. I really like seeing how other woodworkers set up their space and arrange their machinery, as each one is a little different because of different size and shape areas used for a shop.

I have been following your posts about this as you were looking for a house and shop space........been pulling for you all along!

Re: workshop rebuild finally starting

#4

Re: workshop rebuild finally starting

john lucas

roger I've tried sitting down and placing drawings of machines where I think they would go and it just doesn't work for me. I'm gonna have to get in there, set it up and walk around it to really see how it works. Hate that. Thought I would have it all layed out when the guys get here to help me move it back in but apparently my brain just doesn't work that way. Fortunately the Mobil attic where it's stored is only 10 yards away from the building and most of the stuff is on wheels so I'll be able to move a lot of it myself a piece at a time and place it where I think it might go and then re arrange as it goes along.

I thought I would put the lathe by the new windows that are going it but then I would also like the workbench there. Maybe I can figure out a way to do both. They would be inline with the incoming door so when I have the garage door open I would get a nice air flow from the lake through there. We'll see. I will probably post.

About the only thing I know for sure is where the dust collector and air compressor are going because I'm building a special room for them attached to the back of the building.