Pure Grizzly entertainment
Dick Coers
It sure is interesting reading the early reviews on the new Grizzly G0766 lathe. I think most know how I feel about that company, so it explains the entertainment value for me. Items like 10 hours on a new lathe and the head bearings had to be replaced, casting sand inside the head on another, a tool rest that only drops 1/4" below center, motors almost fallen off in the crates, parts loose in the crate and rattling around against each other during shipping, loud motor noise, machines returned with near zero hours running time, and best of all, a banjo that is not long enough to allow turning at rated capacity. There have been some good machines received, but all of them need investment in a new banjo and tool rests for full capacities. Sounds like they should have had at least one Beta testing machine before releasing to the public.
I am so glad we are able to provide your entertainment lately. While it is true the rest [in MY opinion] sits too high in the banjo for some cuts and how tall this lathe is, Grizzly states it is within specs and disagrees that it needs to be more than 1/4" below center line. Of course the PM 3520b sits nearly an inch below center line and is made by the same manufacturer.



