Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

key for a supernova chuck or g3? and more help..

Posts

key for a supernova chuck or g3? and more help..

#1

key for a supernova chuck or g3? and more help..

darrin hill

so is this a supernova (not a supernova 2, which is different) or a g3?




a g3 i can get a chuck key for... if its a supernova they dont make keys for anymore.

there was a thread back in 2013 for people searching for one.... but thought i would start a new one..

so in essence if its a supernova I'm wanting to see fi anyone has a key for it.. if its not then i can just order from teknatool.

Re: key for a supernova chuck or g3? and more help..

#2

Re: key for a supernova chuck or g3? and more help

walta

That looks like a supernova circa 2002

The very early Supernovas used a different key the old thread may have been about those chucks.

If you cannot get a key I do not think it will be difficult to sell in the classified section of this website.

Walta

Re: key for a supernova chuck or g3? and more help..

#3

Bill Blasic

Re: key for a supernova chuck or g3? and more help

Bill Blasic

If that is a Supernova it is all but impossible to find a key for it. The key for the original Supernova wiggled at the gear end and they had a tendency to break. The G3 key does not fit the Supernova. Without the correct key the chuck is about useless. Walta is right sell it to someone who has a key.

Re: key for a supernova chuck or g3? and more help..

#4

Re: key for a supernova chuck or g3? and more help

RCH

Measure the diameter -- that should tell you whether it is a Supernova or G3

Re: key for a supernova chuck or g3? and more help..

#5

That's exactly why I went with Vicmarc

john lucas

It uses a standard 10mm hex wrench. If you lose one you can buy one at the local hardware. I've also seen geared keys with brocken gears which renders them mostly useless. Sorry I can't help you with the needed key for your chuck.

Re: key for a supernova chuck or g3? and more help..

#6

Dick Hines

Re: key for a supernova chuck or g3? and more help

Dick Hines

It looks like a Super Nova . I may have an extra key....if I can find it. Will look today

Re: key for a supernova chuck or g3? and more help..

#7

Re: key for a supernova chuck or g3? and more help

darrin hill

i actually wound up with 2 chucks, one is a super nova nd the other other is a supernova 2... the supernova, if i can get it to work, will just be for my carving stand, so i wont have to get it really tight..

I'm happy... i managed to take the insert out of the supernova and put it into the supernova 2.. so now i have 3 supernovas and a supernova without an insert. and key...

so if nothing happens, i wound up with what i needed... and can sell the old supernova..

Re: key for a supernova chuck or g3? and more help..

#8

Re: key for a supernova chuck or g3? and more help

ben d.

This message is for Dick Hines, If you have an extra key for a supernova chuck I would definitely be interested in getting it if the other person does not have a need for it now.

Reply back and I will reply e-mail.

thanks

ben d.

Re: key for a supernova chuck or g3? and more help..

#9

Re: key for a supernova chuck or g3? and more help

darrin hill

there's a waiting list?

Re: key for a supernova chuck or g3? and more help..

#10

Re: key for a supernova chuck or g3? and more help

Don Evans

I don't have an extra key but be aware that there where 2 types of keys made for the first supernova chucks. The keys had a different number of teeth on them, one had 5 teeth and the other had 7. It's hard if not impossible to look at the gear in the back of your chuck and know which one you need.

It's easy to count them on the key though. Have some one bring one to your club if you belong to one, count the teeth on the one brought and see if it works, then you'll know which you need.

Don

Re: key for a supernova chuck or g3? and more help..

#11

Dick Hines

Re: key for a supernova chuck or g3? and more help

Dick Hines

The key I have I bought in 1999 and it has 7 teeth. Some where in my shop there is a second one that I am sure has seven teeth. The trouble is I can't find it.

I would not mine parting with it if I could find it.