AAW
Dick Hines
Just got home. Traffic was a big pain in butt, but the Symposium was GREAT?
Saw a lot of old friend and made some new ones.
See you all in Greensboro in Nov.
Hope everyone hot home safe.
Knowledge You Can Build On — Est. 1998
AAW
Dick Hines
Just got home. Traffic was a big pain in butt, but the Symposium was GREAT?
Saw a lot of old friend and made some new ones.
See you all in Greensboro in Nov.
Hope everyone hot home safe.
Any new toys displayed at the symposium
Re: Any new toys displayed at the symposium
Dave Delo
Powermatic had a couple add-ons for the 3520B machine. Down-and-out type gizmo for the tailstock and a clip that fits over the spindle lock button to keep it engaged. I think that's standard now but mine (bought in Nov. 2013) didn't have that. It was a free give-away. Never did get a firm price on the down-and-out but JT's is pushing 400 bucks so I'd imagine PM will be in the same ball park. I put about 100 picks from the show up on a couple different links over on SMC if you care to view. Also, 1 vendor (forget who) was doing demo's on a Stratos lathe that I'd never seen or heard of before. Looked like a pretty decent lathe in the Jet/Laguna/Grizzly format.
Stratos seems to be an import into Germany *LINK*
Dick Coers
Very nice extension bed attachment, both on side and end of bed. Pivoting and sliding head.
Stratos video in German
Re: Stratos seems to be an import into Germany
Dave Delo
I watched that video the other night. Agreed, some cool little detail to that rig. Forgot to mention earlier that Oneway was using the newer style carbide cutters in their coring demonstrations. Doug said the tool he was using had 25 cores done on it and he hadn't noticed any difference in the sharpness yet.
Re: Stratos seems to be an import into Germany
john lucas
Which style carbide. The Hunter style which is diamond shaped with a recessed lip, or flat style carbide cutters. I had Mike install one of the diamond cutters on one of my coring tools and it sure does cut better.
Re: Stratos seems to be an import into Germany
Dave Delo
The only Hunter tools I've seen are round shaped. Didn't know he had anything diamond shaped. The Oneway cutter was pointed or diamond shaped but I believe Doug was telling another person that the cutter was flat shaped. He was going on about how he could get a sharper edge with the carbide versus HSS. Not sure I agree with that statement but he's cored about 50,000 more bowls than I have.
Re: AAW
Alan Zenreich
An 8 hour drive today, and we are home. Very nice symposium... great meeting friends old and new.
Cool lathe! Powermatic needs copy some features!
Chris Hoehle
Very cool video, very similar to a Powermatic, but with some really nice touches. I'd love to have those ledges on my Powermatic to make changing the extension bed from low to high an easy one-man job for example.
Found for sale on this site for 2,380 €, which is about $2,668 USD. Wonder what kind of logistical nightmare trying to import one would be?
Also, in case anyone else is wondering, swing is about 18" and between centers without the extension about 31" thanks to Google translate.
Also found this monster on the same site:
Re: Stratos seems to be an import into Germany
john lucas
I have done quite a few experiments in sharpening different steels and so far have not found that you can get carbide any sharper than HSS or High Carbon steel. Usually it's the other way around. Carbide usually won't get as sharp as HSS. However the newer nano carbide that Mike Hunter uses in his tools does get extremely sharp. The cutter will cut you when you try to remove the rubber protecting pad. Magnified the edge looks really sharp but I haven't actually compared it to a HSS or High Carbon steel edge under very high magnification.
Re: AAW
dick gerard
Just finished unloading the van. Left Pittsburgh at 10:30, arrived Indy 7:00 PM. Made a few stops along the way. Great symposium. Wonderful to Alan and LaurenZ, Malcolm Zander and so many many more friends.
Re: AAW
Ivan Clark
Made it safely home to the shop ~10:30pm Sunday. The rain going through the mountains was exhausting.
The Nissan Sentra with NJ license plates parked next to me in the convention center garage apparently ran out of gas sometime in the early hours of Sunday. It was parked there Friday morning and left running and locked with the lights on. Saturday night ~11pm it was still running with the gas gauge on empty. I did give the info to the AAW info desk Friday afternoon, but they didn't seem to have any way to get the word out. The garage folks said that the good news was that the AAA wrecker could get in and out of the parking garage through the upper level entrance and take the ramp down to where we were parked.
I missed out on the PM lock widget. I did win 2 pencils in their spinning wheel game.
Jet was showing their new 1642 (prototype, I think) with headstock that both slides and pivots. Talking to the guy manning the Jet booth it might now be possible to buy the vortex plate to upgrade the DC1100 instead of having to buy a wok for the upgrade.
Nova was showing a DVR upgrade for the 1642.
Peachtree was selling a nice 5-wheeled cart for holding lathe tools. If it had not been such a long hike to the car, I would have bought one. Probably would have anyway at closing time Sunday, but they were all gone by then.
One of the vendors (having a senior moment about their name and the notes are in the shop) had an upgraded (heavier duty) version of their threading jig that could handle larger diameter boxes. They also had a prototype of an accessory for the threading jig that lets you put the top on and then rotate it 20 or 30 degrees to engage the threads and lock it down (as opposed to having to turn the top 4-6 full revolutions). If the finished product works as well as the prototype, I expect it be a hit.
Nasty drive and way too much walking for these tired old joints, but I am glad that I went.
Re: AAW
john lucas
Thanks Ivan. Was it Chefwarekits that had the threading jig upgrade.