Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

general seal a cell

Posts

general seal a cell

#1

general seal a cell

joe zarnitz

any problems using this as a stand alone finish on a bowl---tks,joe

Re: general seal a cell

#2

Ellis Walentine

Works for me

Ellis Walentine

I like this product a lot. It has many of the properties of my old favorite, Waterlox, but costs half as much. I know that David Marks also uses it extensively in his work. It is self-sealing, so it can be used without preliminary priming or sealing, though I usually dilute the first coat a little with naphtha. I also prefer to wipe on several coats, using just enough to extend it evenly over the surface, leaving a moist slick -- not too dry, not too wet -- sanding very lightly between coats with 320 or 400-grit paper. This approach yields a smooth and relatively dust-free build.

Ellis Walentine, Host

Re: general seal a cell

#3

Re: My experience

Steve Criscenzo

I have been using Seal a Cell on bowls for about 4 years and I am very happy with the results. I flood the surface for about 20 minutes and then wipe off the excess. I let it dry for about a week and either buff and wax with Beal system, [semi gloss] or buff with a fine scotch Brite pad [matte finish]. It provides a good seal without a surface build up.