can't post a link to my latest skew video
john lucas
I'm having trouble logging into the AAW website. If your an AAW member you can find a link to my video in the latest Journal. It was part of Keith Thompkins article on skew cuts.
Knowledge You Can Build On — Est. 1998
can't post a link to my latest skew video
john lucas
I'm having trouble logging into the AAW website. If your an AAW member you can find a link to my video in the latest Journal. It was part of Keith Thompkins article on skew cuts.
Re: can't post a link to my latest skew video
Chris Hoehle
Is this the link? I just navigated in from the AAW vimeo channel until I found it:
Perfect thanks Chris
Re: Perfect thanks Chris
Chris Hoehle
No problem! I wound up watching it too and thought it was really good- I make a few boxes, so I will have to give the slicing straight in on the end grain or arcing up a try.
Very good video on the skew
David Walser
John -- Thanks for sharing your knowledge with the rest of us. The video is well done and you do a very good job of explaining how to make each cut. I hadn't seen the end grain cut where you arc the skew up, rather than down, into the wood. I'm going to have to play with that one.
It's another video that's well worth the viewer's time.
Re: can't post a link to my latest skew video
Keith Tompkins
Thanks John......you make it look easy! 
very clear and well done, John
GaryG in MD
This is very helpful to take away a bit of the "fear factor".