Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

New video from Lyle *LINK*

Posts

New video from Lyle *LINK*

#1

New video from Lyle *LINK*

David Walser

Lyle Jamieson has a new video up on YouTube. This one is on making a bowl from a tree crotch. No trees were harmed in the making of the video. (It's all a white board session as Lyle explains the design options when turning a crotch. No turning is done.) He shows a couple of heart-shaped bowls made by turning a natural edged bowl. The video is well worth your time. My only complaint is the example bowls go by too fast. (That's why they invented the rewind and pause buttons!)


Crotch bowls

Re: New video from Lyle *LINK*

#2

Lyle Jamieson

Thanks David

Lyle Jamieson

Thanks David, I spent more time talking about the finished bowls in the shoot, but it got cut. It is difficult to get the time under 10 minutes. So I will depend on multiple videos to sooner or later get all the info out to the YouTube viewers. My Bowl Basics DVD is 4 hours-20 minutes long. Not many on YouTube will sit through it.

Re: New video from Lyle *LINK*

#3

You're welcome

David Walser

Your Bowl Basics DVD set is one of the most informative I've seen, but I agree -- it's far too long for YouTube. The video is well worth viewing by new turners. It's also worth viewing by more experienced turners because you share several perspectives that have application well beyond turning a bowl. I wish the DVD set had been available when I started turning.

One of the things that I appreciate about your videos is that you explain why you do something. An example of this from your Bowl Basics DVD is the explanation of why you use a face plate rather than a chuck. Too many instructors simply tell us how to do something. Why is often just as important as how.

Re: New video from Lyle *LINK*

#4

Re: New video from Lyle

robo hippy

One added thought to this. We had a demo where the turner started a small crotch between centers. He remounted it numerous times to get the 3 piths to line up. I thought, why not take 3 risers of some sort, with a screw through them at the same height, and screw one each into each of the 3 piths. 3 points make a plane. Then you can scribe a line for the perfect saw cut. Of course, you still have to try to get the chainsaw to cut on the line...

Also, I have gotten a couple of trees with nice very large crotches, and they had zero crotch figure in them. One was a walnut with 20 inch branches. All of them had one common factor, they were deep forest trees, not ones from out in the open. Any one else experience this?

Nice to see you in the resurrected More Woodturning Magazine. The new format, since Fred retired, looks like a serious attempt to fill in for the expired Woodturning Design.

robo hippy

Re: New video from Lyle *LINK*

#5

Lyle Jamieson

Re: You're welcome

Lyle Jamieson

Thanks for the feedback. Yes, I do things different from a lot of folks, but my reasoning is sound and based on the experiences of many of the masters in the turning world. None of what I teach is mine, it didn't take any talent. I learned it from the best with a lot of practice.

Re: New video from Lyle *LINK*

#6

Lyle Jamieson

Re: New video from Lyle

Lyle Jamieson

Thanks reed, Yes, the first chain saw cut is critical. The wind from the open field tree might have helped the character of the crotch. I have never found a tree without some feature to the crotch. Some are subtle, some are spectacular.