Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Got some Oak planks and split a ton

Posts

Got some Oak planks and split a ton

#1

Got some Oak planks and split a ton

john lucas

I spent all yesterday afternoon, about 6 hours splitting the wood from a tree I had to take down. Got really tired of rolling 20" x 16" long logs up to that machine. I was really glad when I got to the smaller ones that were only 14" in diameter. My neighbor let me borrow it and want to sell it so if it's reasonable I need one badly for this coming winter. I may be getting to old for this. I didn't do a good job of stacking it because it all has to be moved to my wood shed but there is probably a little more than a chord there.

I also drove over to a friends house to retrieve some of the 200 year old oak that was cut down on campus about 4 years ago. He had it sawn up into 1" boards so if I turn any into platters they will be quite thin. More than likely some of it will end up as mirrors. My friend Pat Matranga will be turning pens out of this for the University. Lousy photo, there are about 8 boards there mostly about 16 to 18" wide.


Re: Got some Oak planks and split a ton

#2

Brad Vietje

Re: Got some Oak planks and split a ton

Brad Vietje

John -- Does that splitter have an option to pull a pin and tilt it up vertically, so it splits downward with the fixed end on the ground? Most that I have used have this feature, but not all -- wheels and frame stay put, but the hydraulic ram tilts. Sometimes more fun to grunt a log onto the platform at ground level rather than having to lift or roll 'em up a ramp to waist height.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Got some Oak planks and split a ton

#3

Re: Got some Oak planks and split a ton

john lucas

It does. There isn't any way I would have used it otherwise. It was hard enough just to roll those Oak sections much less pick them up. The neighbor and I made a deal and it's mine now.