Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Bandsaw maintenance

Posts

Bandsaw maintenance

#1

Bandsaw maintenance

Philip Duffy

Well, my nice long posting this morning about how to check your BS for problems was too long or too obnoxious so Ellis decided that it should not be posted. So, here is a shorter version; check the torque on your attachment bolt for the riser block, make sure your drive wheel is securely attached to the shaft, if the tires are worn get new ones but in the mean time glue them in place with contact cement. The end. Phiiip

Re: Bandsaw maintenance

#2

Re: Bandsaw maintenance

jim breeden

Are you trying to tell us something, as my bolts are always torqued. :b

Re: Bandsaw maintenance

#3

Riser blocks can often be a source.......

JamieDonaldson

....for alignment errors between the wheels. And they can also induce body frame flexing, especially when changing blade sizes and tensions.