tailstock adapter
Dave
Does anyone know where I can get a tailstock adapter w/ a 3/4" X 10 tpi male end that has a morse taper on the other end, either 1 or 2?
Knowledge You Can Build On — Est. 1998
tailstock adapter
Dave
Does anyone know where I can get a tailstock adapter w/ a 3/4" X 10 tpi male end that has a morse taper on the other end, either 1 or 2?
Re: tailstock adapter
Bill Howatt
The Oneway live center has such a thread and it can be locked with a rod if you don't want the threaded portion to turn. Not sure just what you want to do but the Oneway with its accessories is a very useful center. Comes in MT1, 2 or 3.
Seems Oneway has changed their site and I don't see good info displayed on the product so here is an alternative link:
http://www.woodturnerscatalog.com/p/108/5487/Oneway-Multi-Tip-Revolving-Center-4-Piece-Set
Bill
Re: tailstock adapter
John lucas
I havent looked on tbeir site but go to www.bestwoodtools.com and do a search Vic makes a lot of odd adaptors
Re: tailstock adapter
Brad Vietje
Dave -- this product, from Best Wood Tools looks like what you want (credit to John Lucas for suggesting them):
http://ep.yimg.com/ay/bestwoodtools/face-plate-arbor-2-morse-taper-to-3-4-x10-tpi-11.gif
Looks like it's made for mounting a small faceplate, but has the MT-2 and 3/4-10 you are looking for.
BTW: Bill's suggestion of using the Oneway live center (or it's Jet/Powermatic clone) would also work if you inserted the pin to prevent the tip from rotating, but there might be too much play in it for your application.
Safe spinning,
Brad Vietje
Newbury, VT