Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

How to demonstrate woodturning

Posts

How to demonstrate woodturning

#1

How to demonstrate woodturning

Donna Banfield

Looking for some help from the collective wisdom of this group. A young man in his early 20's (whom I met when he was still in high school) is interested learning how to become a good demonstrator of Woodturning.

I remember a couple of very good references to steer his way, but I am having a memory blank on the particulars. One was a YouTube video, approximately an hour long, on how to do a good demonstration. The other was an article that appeared in the AAW's American Woodturner Journal, things that make a good demonstration. I have searched both YouTube and the AAW Journal index for these and came up blank.

Perhaps someone with a better memory can help me out?

Re: How to demonstrate woodturning

#2

Re: How to demonstrate woodturning

Michael Gibson

Donna,

2011-04-30 Planning and Presenting a Successful Demonstration by Frank Penta 1h04m49s)

Sorry l could not find the link but you will be able to find this on Youtube.

Re: How to demonstrate woodturning

#3

Reminds me, How do you get to Carnigie Hall?

Dick Coers

Practice, practice, practice. After that, attend a lot of demos and mimic the good ones.

Re: How to demonstrate woodturning

#4

Re: Reminds me, How do you get to Carnigie Hall?

Donna Banfield

Thanks, Michael. That's the one I remember. And Dick, hahaha. We all know this woodturning thing takes a lot of practice. But don't you wish when you were starting out, there was a way (or someone to tell you) the difference between a good demo and an okay, mediocre or bad one? I know I benefited from that kind of help.

Re: How to demonstrate woodturning

#5

Lyle Jamieson

Re: How to demonstrate woodturning

Lyle Jamieson

Its a matter of passion. When you are excited about what you have learned you want to share it with others. Teaching what others do would be hard. Teaching what floats your own boat will be easy. If you asked me if I was a sculptor or a teacher 30 years ago, it was way beyond my comprehension. Those words were not in my vocabulary. The rest is history.

Re: How to demonstrate woodturning

#6

Re: How to demonstrate woodturning

walta

First you need to make quality work in a way that sets you apart from other turners.

Some strive for different shapes other go for speed some is very delicate one turner is set apart by his lack of eye sight.

Next you must develop a personality turners will find appealing. Having a foreign accent seems to work.

If you plan on earning enough money to eat, you will need a unique signature tool to sell.

Walt

Re: How to demonstrate woodturning

#7

Re: How to demonstrate woodturning

don stephan

Review as many example videos as possible. Decide which one(s) to emulate, then make several trial runs. Record them if possible and review. Have multiple work pieces at various stages in case of unanticipated fatal flow part way in.

Re: How to demonstrate woodturning

#8

Re: How to demonstrate woodturning

robo hippy

I formulated my demonstration approach by surfing the forums. The questions that are asked are what people want to know, and the different answers give different solutions to different problems. Ask any 10 turners the same question, and you will get at least a dozen different answers. I start with an outline, but never seem to be able to follow it. I get part way through, and get distracted by a question, and another question.... Preparing also lets you focus on your own processes. Answering questions on the forums also helps you formulate different approaches.

robo hippy

Re: How to demonstrate woodturning

#10

Re: How to demonstrate woodturning

john lucas

Well obviously you need to be knowledgeable about the subject. Then you need to be entertaining and engaging. The best demonstrators are fun to watch by all, beginners and advanced. Explain what your doing constantly. When you hollow a bowl for example don't just say I turn the flute this way and then cut downhill with the grain and then hollow for 10 minutes. Explain to them how you move the handle to keep the bevel in contact. Explain where its cutting on the edge and why you are cutting with that part of the edge. I will often change the angle and try to explain what happens when i do or show them how the tool comes out of the cut if you don't swing the handle.

Most of all you have to have fun. If your having fun the audience is also. If you tell jokes which I love to do, be very very careful which ones you tell. That should be obvious but it's so easy to T off someone these days and as much as I hate political correctness there is a place for it to some degree.

Your demo should flow smoothly and ideally go quickly. One problem I have I think is being to monotone. It's too easy to have older turners fall asleep. I see it happen at even major demos. It's partly because we sort of drone on. Listen to newscasters. They vary the sound of their voice constantly and this helps keep everyones attention. I try to do it but if you see heads nodding you know your not keeping them awake. Get a big catch at that moment and it will wake everyone up :)

I'm finding that shorter easy projects get the most acceptance. Everyone wants to come home with something they can turn. I know some demos such as hollowing and piercing simply can't be short or simple but sometimes you can divide it up into simple steps that maybe the beginner can use for some other project.

Lastly I think is to evaluate how you did on each demo. What you should have done differently and how you say things. If they video the demo watch it yourself and critic it. Don't be afraid to ask others about what you should change in a demo. One example is I now discuss "gliding the bevel" instead of riding the bevel" and explain to them why. When you say riding the bevel it implies pushing on it. I find you should have a very light pressure on the bevel so you can better feel the cut and get cleaner cuts. Pushing on the bevel also causes flex and chatter on thin spindles. It's something that I learned by evaluating how I work and talking to other turners about how they get students to learn to ride the bevel.

Obviously these are just my takes on demoing and may or may not work for everyone. A whole lot of it is personality. My friend Pat Matranga and Kim Winkle both have really fun personalities and come across very friendly and open when they demo. I always wish I could be that much fun. I try and don't think I come off unfriendly but I'm just not as much fun as they are. Maybe I should wear a dress. As mentioned above it doesn't hurt to have a foreign accent. So a Kilt and bit of an Irish lilt might be the way for me to go.

Re: How to demonstrate woodturning

#11

Re: How to demonstrate woodturning

Donna Banfield

Thanks everyone for your helpful comments. The young man has been turning since I first met him during a 2-day demo I did for his shop class in 2004.

He wants to make the move into demonstrating. He was a volunteer helping out in the New England Woodturning Symposium that just happened a couple weeks ago, which spurred this action. He knows to start demo'ing at the club meeting level, but he wants to do his homework first. That's why he contacted me for some suggestions.

John and Reed, I will suggest that he watches and studies your YouTube videos. You both are very good at describing what you are doing, in a way that is easy for a student to understand. That's why I always recommend your videos to my students when our sessions are done. Lyle, I have a couple of your DVD's and have watched some of your YouTube videos as well, and will add your name to the list that I recommend to my students.

Stay tuned...maybe in a few years we'll see another up and coming young turner on the scene.

Re: How to demonstrate woodturning

#12

Lyle Jamieson

Re: How to demonstrate woodturning

Lyle Jamieson

Thanks Donna. I am more of a teacher than an entertainer but John has a good point, you have to keep the audience from falling asleep. Keep us posted on his progress. I like to keep the audience involved and welcome questions and ask them questions to get them thinking.

Re: How to demonstrate woodturning

#13

Re: How to demonstrate woodturning

Hal Taylor

Frank Penta also had a booklet on doing demos. Might be on his website.

Re: How to demonstrate woodturning

#14

Re: How to demonstrate woodturning

robo hippy

Donna,

I don't know where you are located, but I, and Lyle, and a bunch of others will be in Pittsburgh for the symposium. Going through the vendor area can let you see a lot of demos... Not all who turn can teach.

robo hippy

Re: How to demonstrate woodturning

#15

Brad Vietje

Re: How to demonstrate woodturning

Brad Vietje

Ideas from experience -- meaning from all the mistakes I have made...

- Fewer "things" try to do more with less

- Movement -- don't stand behind the lathe

- Lathe placement: we usually place the lathe across the front of the room, blocking almost all the view. Better to point the tailstock toward the audience to maximize visibility, minimize the # of cheap seats

- Good graphics -- either slides or large drawings prepared ahead of time. Clay Foster brought great drawings on flip charts to Totally Turning years ago showing how tools cut -- these were very good.

- Like John stated, tell them what you are doing and why.

- RE: Penta video: get a room, for crying out loud! Ideally, demo in a separate room so there are fewer distractions

- Julia Child's method: bring examples showing the steps... turn this, then TA-DA, it's done! ... pull it out of the oven. Can't do this unless your prep work is done

- have samples to pass around

- clear, simple handout or very clear download instructions to critical info

Try to anticipate any/all problems and work them out with organizers before hand (spindle size, tail center size, can it be removed? No knock-out bar? etc, etc ...) If there's a camera setup, make sure someone knows how to run it, and make adjustments to show what the audience needs to see.

Sounds like Bradley (?) -- nice young man!

Safe spinning,

Brad Vietje

Newbury, VT

Re: How to demonstrate woodturning

#16

Mike Peace

Re: How to demonstrate woodturning

Mike Peace

The two best practices Frank Penta authored are great references for any turning demonstrator. They can be found on the AAW site here http://www.woodturner.org/?page=BestPractices # 52 & 53. Frank Penta's video on How to Demonstrate was produced by my club. The AAW also has it on their website broken down into smaller sections with the sound cleared up.

The links can be found on the same page as the Best Practices sited above.

Re: How to demonstrate woodturning

#17

Re: How to demonstrate woodturning

Dale Gillaspy

I'm going to add one thing to the mix, tagging on to what John Lucas said. You have to be able to keep the audiences' attention. The best demonstrators I have seen all seem to interject stories into their turning about their background, where they learned, how they developed a technique, etc.... You have to be able to do that while turning, stop for a minute to change focus, and get back to turning. IMHO, Jimmy Clewes, Molly Winton, John Lucas, David Ellsworth, Mike Mahoney among many others, have a great knack for timing and doing this. Some other great turners with outstanding reputations can teach what they are doing just fine, but are missing something in that "Wow, I want to see that again..." factor.

Re: How to demonstrate woodturning

#18

My favorite observation of demonstrators

Dick Coers

There is a direct correlation in the amount of random story telling and talking versus difficulty of operation. When the cut is critical, there is an involuntary reaction where the brain shuts off the talk button so all concentration is directed to the hands. Watch next time, even the best go quiet when maximum skill is required. Most of the time, I love how the human brain works.

Re: How to demonstrate woodturning

#19

Re: My favorite observation of demonstrators

john lucas

Dick You are so right. That's why it's super important to practice what you demo frequently. If I haven't done a technique in a while I will do a project just before I go to try and refresh those skills.

Re: How to demonstrate woodturning

#20

Re: How to demonstrate woodturning

don stephan

Develop at least three completely different explanations for each operation using completely different terminology. When someone asks a followup questions don't simply repeat the same explanation.