Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Aspen Lamp Shade Photo Essay

Posts

Aspen Lamp Shade Photo Essay

#1

Brad Vietje

Aspen Lamp Shade Photo Essay

Brad Vietje

Got my hands on a big fat Poplar log recently (Big Tooth Aspen, small end 22", large end 25" and 14 feet long), so I brought home a 3' section to practice a few lamp shades for a project I have been thinking about for months. Yesterday I took a break from all my landscaping/gardening chores, and tried a simple "Coolie Hat" shade for practice.

BTW: a 36" long hunk of wet Aspen is pretty darned heavy! Rolled it into the truck with ramps (waaaay too short/steep) with GREAT effort. Here it is in front of my little John Deere 210 under restoration...


Cut away enough to fit it on the lathe and started roughing the outside shape, leaving things thick to start:


Found a new use for a sliding head stock when my lack of planning left the tool rest banjo stranded on one side of the 18" solid shade blank...


And the solution was to remove the tail stock, then slide the banjo and head stock down to the end so I could extract the banjo:


And then to hollowing the inside:


I decided to do this differently than Peter Bloch (the real master of all things wood shade related), by shaping the interior first, then achieving finished thickness from the outside (he turns the outside to finished dimensions first, then hollows from inside)...


Working in stages and doing my best to blend them together (not entirely successful, but off to a decent start):


Getting pretty thin -- no going back to touch up that rim now !


And the really hard part is figuring how you will get the darned thing off the lathe! My method only worked so-so, since the tree was pretty punky at the center, so I'll need to check with the master about how he does this!

And the end product -- 17" by 7.5", no finish yet, but will soak with one oil or another when it's dry:


It was pretty hard work, and I was wet and more than a little tired when finished -- a good workout ! The shape is only so-so, since there's an unintended bulge near the top, and I banged into the 1/4" x 4" GRK screws holding it on the faceplate, but a bit more advanced planning, and the next one should be better.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Aspen Lamp Shade Photo Essay

#2

Re: Aspen Lamp Shade Photo Essay

Rum

Nice work Brad,

I've had a few people ask if I could make such a thing but I lack the courage (and skills to be honest) to do one of the straight sided ones :D Might be able to pull off a curved one like this though.. Hmm..

Re: Aspen Lamp Shade Photo Essay

#3

Re: Aspen Lamp Shade Photo Essay

TomB

Very cool Brad, I like that you included the steps and the finished product.

Re: Aspen Lamp Shade Photo Essay

#4

Dennis in Southern Oregon

Re: Aspen Lamp Shade Photo Essay

Dennis in Southern Oregon

Nice job, Brad and good presentation. I have always wanted to have a go at a shade. One question though. Doesn't doing the outside last tend to cramp your style a bit while trying to stay out of the line of fire at a time when piece is weakest?

Dennis

Re: Aspen Lamp Shade Photo Essay

#5

Brad Vietje

Re: Aspen Lamp Shade Photo Essay

Brad Vietje

Interesting thought, Dennis.... I suppose it could, but I was pretty well out of the way -- pretty much standing at the headstock working from right to left -- actually leaning against the headstock for the last 1/3 or so.

I suppose the good news is that if she blows apart, the shards can be sharp, but they're thin, and don't weigh much at all, so a face shield will do the job nicely. The only time I shattered one was when I caught a tool on the rim (pulling it out, not trying to make a cut), while guiding it with my left hand, so I got whacked in the fingers pretty good, and luckily, no skin was broken nor blood spilled.

The way Peter Bloch did it last time I saw him demo this about 5 years ago, he shaped the outside, then after bulk removal inside, used a number of teardrop scrapers in an Stewart Armbrace handle. He had about 12 of them all sharpened up and ready, and when he's turning these for production, he can even use an assistant just sharpening the scrapers for quick swap-out.

I only have 1 of these larger Stewart scrapers, so I opted to approach finished thin-ness from the outside, reasoning that it would be an easier cut downhill, from rim toward the top/middle of the shade. That part actually went very well, but the inside work resulted in a little bulge toward center that I was then obliged to follow :\

When I have a few more teardrop scrapers and a sharpening assistant standing by -- or perhaps a Hunter tool (?) -- I would like to try thinning from the inside again. With only one, there's a tendency to use it too long as it dulls, and thus use a bit too much force, which can separate the growth rings and result in cracks. Stopping many times to resharpen would require frequent spraying of the wood to keep it wet, lest it start to warp during the lengthy turning process, so a lose-lose.

I'll make another soon, and we'll see if I can learn from the experience!

Safe spinning,

Brad Vietje

Newbury, VT

Re: Aspen Lamp Shade Photo Essay

#6

Michael Kratky

Re: Aspen Lamp Shade Photo Essay

Michael Kratky

Nice job Brad, especially fresh off Peter's demo at the New England Symposium. Don't know how many times I wanted to run right back to the shop after a great symposium and put to use what I just learned but inevitably never did.

Re: Aspen Lamp Shade Photo Essay

#7

Brad Vietje

Re: Aspen Lamp Shade Photo Essay

Brad Vietje

...or haven't YET! Today could be the day...

Safe spinning,

Brad Vietje

Newbury, VT