Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Converting a reeves drive to variable speed

Posts

Converting a reeves drive to variable speed

#1

Jerry Louden

Converting a reeves drive to variable speed

Jerry Louden

I have a Delta Iron Bed 1440 with a Reeves drive that I want to change over to a variable speed drive. I recall in the past there being conversation on WC as to how to do it. Does anyone have this information or can point me in the right direction? Thanks, Jerry

Re: Converting a reeves drive to variable speed

#2

Re: Converting a reeves drive to variable speed

Ray Thompson

I would leave the reeves drive alone and just change the motor to 3 phase and get a vfd. We did Dicks a few years ago and I think it is still going strong.

Ray

Re: Converting a reeves drive to variable speed

#3

Harry Robinette

Re: Converting a reeves drive to variable speed

Harry Robinette

I changed my Union Graduate over. The big thing is get your pulleys set to two speed ranges that will give you the rpm ranges you want. Finding pulleys the size you need is not all that easy. Also you need to watch your belt length some sizes are hard to find. I believe mine are 2 1/2 and 5 1/2 the ones on my Vega 2600 are 7 and 3 which were to big a diameter for were they had to fit.

Re: Converting a reeves drive to variable speed

#4

Re: Converting a reeves drive to variable speed

dick gerard

Yep, its still going strong, though the Reeves drive is making a lot of noise, even after I filled the zerk fitting with grease, checked the belt, checked the belt tension, etc. I'm guessing that the Reeves drive is just plain noisy after 30+ years of being rode hard and put up wet!

Re: Converting a reeves drive to variable speed

#5

Re: Converting a reeves drive to variable speed *LINK*

Dave Paine

+1 on going with 3 phase motor and VFD. I did this on a Southbend metal lathe.

The 3 phase motor is so smooth and quiet.

One place to look for VFD and 3 phase motor is Dealers Electric.

Wiring is easy. Just get the relevant VFD for 120 or 240V input. 120 input is not as common as 240. Output needs to match the motor.

Nuance with replacing the motor is to get the same mounting method and frame size.


http://dealerselectric.com/