Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

light stand

Posts

light stand

#1

light stand

bill tucker

My apologies - this got posted in classified - dumb!

It seems that everybody recommends the Oneway articulating light stand and it is very good, although quite expensive. In the back of my antique memory is a recollection that someone detailed the building of a home made version for those of us with more time than money. However, no manner of searching, googling or other computer gymnastics can seem to produce this step by step process. Knowing that this subject has probably been beat to death in the past, I never-the-less beg your indulgence. Would someone please post a link or direct me to this info.

Thanks,

bill

Re: light stand

#2

Re: light stand

lee tourtelotte

Bill -- You might ask your dentist what he or she has done with their previous incandescent dental lights.

Most dental offices have by now replaced their traditional incandescent lights with modern LED lights.

If you are lucky, the old, articulated light fixture is in a storage closet somewhere, just collecting dust and your dentist will very likely make you a great present of it! I really love mine, in that I can move it to any angle instantly, without any further adjustment necessary. These dental light fixtures, with their heavy duty articulating bracketry and counter weights, originally cost hundreds of dollars. You might find one of these woodturning treasures for free! I will try to post a couple of pictures of mine -- if I'm unsuccessful, you can email me below and I will email you the pictures. Good Luck!

Lee Tourtelotte

Minnesota Woodturners Association

leetourtelotte@msn.com

Re: light stand

#3

Joe Fleming

Re: light stand

Joe Fleming

I filled an empty gallon paint bucket with concrete and jammed a 4' length of 1/2" EMT conduit in it. When dried, I bought an inexpensive articulating student desk lamp and placed the mounting peg in the end of the conduit. The bucket sits behind the lathe. Excellent movable light source.

Re: light stand

#4

Re: light stand *LINK*

Chris Hoehle

Here's a photo step by step of one I made out of an Ikea light that retails for $9.99 and some magnets.

http://imgur.com/a/4PPqR

(Imgur is just a photo sharing site like Flickr)

Re: light stand

#5

Re: light stand

Rik, WI

Chris, Excellent idea and walk thru. I purchased 20 of these for use around the shop, home, and office with plenty to be used as replacements. For those interested, search Ikea's site for LED work light or 201.696.58. Rik

Re: light stand

#6

Re: light stand

Chris Hoehle

Wish I could say I came up with it entirely on my own, but I first got the idea from Cindy Drozda a few years back- heard her talking about it at a club meeting then when I was at Ikea lately I saw them and thought, hey aren't those the lights Cindy was mentioning? I should pick a couple up and see what I can come up with.

Re: light stand

#8

Re: light stand

bill tucker

Great step by step photo instruction!! Thanks

bill

Re: light stand

#9

down on dentist light

David Staeheli

Can't recommend surgical lights. The one I have with a fairly large reflector is too big to bring in close, and then is also too focused a light. I've heard good things about the IKEA lights but I"m too cheap. I buy the flexible gooseneck study lamps at the the thrift stores, remove the base do some creative bolting. Downside to a ONEWAY lathe is that everything is round with no good places to clamp on a magnetic base.

Re: light stand

#11

Simple fix on Oneway Headstock *LINK*

Mike Brazeau

Here is a simple fix to make a platform for a lamp on a Oneway. I borrowed the idea from another guild member's lathe. It is secured with bolts in a couple of available metric bolt holes which are used when pulling the headstock apart. A small plate of steel fastened to the wood provides a base for magnets. This setup is great for spindle work and some faceplate work but I also use the IKEA $9.99 lights and move around wherever needed using a couple of the large bar magnets seen on the headstock body. Switch on this Delta lamp has been replaced with a line cord switch. I use a halogen miniature flood bulb (Par16) in it.


img

The Joy of Wood