Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Rebuilt Husky 346xp

Posts

Rebuilt Husky 346xp

#1

Brad Vietje

Rebuilt Husky 346xp

Brad Vietje

I had arranged to get a rebuilt 346xp back in January, but the fellow just didn't get around to it for well over 3 months, so last week I decided something needed to be done. I considered getting a new 550xp or 562xp, but after checking around, decided against a new Husky. Local dealers -- and around here, these guys live or die based on professional loggers, not homeowners & weekend warriors -- all agreed that the newer Husky saws are just not as good as the older models. The auto-tune and x-torq models have had many more problems than the older models. I decided I could get two rebuilt saws for about the same money, so I could get a smaller model now, and go back for a 372xp or 385xp for larger stuff if & when I need it.

So, I took a drive to a bigger, much better established dealer north of here, in the Northeast Kingdom of Vermont, and made off with a slightly souped up saw. When rebuilt, they replaced the top end & piston with one from a Jonsered 2153, so I have a hybrid saw -- perhaps a 353xp ? Anyhow, she's a right screaming little machine, with surprising power for such a light saw. The 346xp is rated at 2.7 hp, so with a bit more displacement, mine might have closer to 3 hp (?), but I'm not sure.


FWIW: due to the changes in Husky's reliability and the increase in "bring-backs", these guys have dropped Husky as their pro line saw for tree services and professional loggers. While they still love the older Husky saws, for a brand-new unit, they now recommend Dolmar as the most rugged and dependable professional grade saw on the market. I found that interesting, and a bit surprising, but I wanted the older 346 and near as I can tell, made out pretty well.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Rebuilt Husky 346xp

#2

Ellis Walentine

Hey, that's my saw!

Ellis Walentine

Of course I don't have the fancy Jonsered piston, but I'm still delighted with the 346XP. It's the perfect size and weight for all-day cutting and limbing. I've had it over ten years now and it has never let me down, except once when I needed to rebuild the carbuerator.

Satisfied customer. Not expecting to buy another saw as long as I can keep this one going.

Ellis

Re: Rebuilt Husky 346xp

#3

Let Er Rip!!!

Don Orr

Or crosscut as the need be. Enjoy!