Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Craig Lossing inspired piece

Posts

Craig Lossing inspired piece

#1

Craig Lossing inspired piece

Dick Coers

Craig Lossing stopped by our club in Peoria on the way to the Baltimore ACC show. He demonstrated his signature pinned finials, and I gave it a try today. The picture scale is a little deceiving. The walnut stem on the finial is only 3/16" diameter. The padauk cross pins taper from .075" diameter to .19" diameter, 2.4" long. The hollow form is roughly 4" sphere.


Re: Craig Lossing inspired piece

#2

Re: Craig Lossing inspired piece

GaryG in MD

That's a nice piece, Dick, but I'll be honest -- I prefer just one pin.

Just me... good job. ...GG

Re: Craig Lossing inspired piece

#3

Thanks Gary,

Dick Coers

but what is curious about the cross pin, is that you can nest 4 fingers in the 4 openings between the pins. Kinda feels fun, just hoping nobody decides to "horse" that thing open since you can grip it so well!

Re: Craig Lossing inspired piece

#4

yeah, that's the last thing you want!


Re: Craig Lossing inspired piece

#5

Lyle Jamieson

Re: Craig Lossing inspired piece

Lyle Jamieson

Hay, I like the through pins. I wonder what it would look like if the holes were drilled on a little angle?? It would be fun to do a series of these, and watch the progression.