Stained Walnut
Ron Solfest
I've screwed up and am looking for recommendations on how to best proceed.
Last summer a friend of a relative had a walnut tree they had cut down and were getting rid of. I took the opportunity to gather a number of ~4ft sections about 14inch diameter and proceded to rough turn dozens of bowls. I sealed them with anchor seal and put a lot of blanks in the garage on wire shelving anticipating some nice bowls this year.
Now when I look at them all have developed black staining (mold I suspect). I was hoping this would turn off, but you can see in the photo's that it runs in through the end grain in speckles. Attached is a turned and finished bowl that I like, but if you look at the close-up you'll see black speckles in the end grain. Also is another blank I just turned the outside on and the speckles are very evident.
What can I do? Did I turn all of this nice wood into firewood? Should I turn a bunch of painted bowls? Any way to get rid of the staining? A non-turner commented they didn't think it was a problem, but that just doesn't sound right when I clearly see the black speckles.
I'd love any ideas.
Thanks,
Ron





