Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Using the router on the lathe *LINK*

Posts

Using the router on the lathe *LINK*

#1

Using the router on the lathe *LINK*

John Lucas

I did a demo in Georgia on using the router on the lathe. They just posted a video of the demo I'm not very sharp on using my phone to copy and paste videos so I hope I did it successfully


https://m.youtube.com/watch?v=yu0cJeKhqLA

Re: Using the router on the lathe *LINK*

#2

richie croce

Re: Using the router on the lathe

richie croce

Great vid on router work.

checked out your youtube channel,looking for vid on how you make your pendants. Looking forward to seeing your procedure on youtube.

Re: Using the router on the lathe *LINK*

#3

Re: Using the router on the lathe

Peter Lamb

Well done John. I wish I had been there. Super video as usual.

Really great process with great results w/o the need for $40,000

worth of tools!

Re: Using the router on the lathe *LINK*

#4

Re: Using the router on the lathe

John Lucas

When I get moved into the new house(which we are doing right now) and I get the shop built I will do a video on pendants

Re: Using the router on the lathe *LINK*

#5

richie croce

NM/great


Re: Using the router on the lathe *LINK*

#6

Re: Using the router on the lathe

Dale Cook

Very nice video John, I've used a router before and have the same indexer.

I'll have to dig it out again, you had some very good tips so it should be much

easier. Thanks

Re: Using the router on the lathe *LINK*

#7

Re: Using the router on the lathe

John Stegall

Thanks John and thanks to the Gwinnett County Woodworkers for sharing. Best hour and 20 minutes I have spent in a long time.