Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Looking at a new bandsaw - anyone have the MM16?

Posts

Looking at a new bandsaw - anyone have the MM16?

#1

Looking at a new bandsaw - anyone have the MM16?

Chris Hoehle

Sometime in the next couple months I'm gonna pull the trigger on a new bandsaw and the MiniMax S400P MM16 at 4.8 hp has caught my attention. Does anyone here have this saw or recommendations on where to get it for the best price? I've seen it on a couple websites listed for $3,295 "but call for best pricing" and I was wondering is this one of those things like the Powermatic lathes where the actual price anyone pays is usually less than the list price?

Anything else worth considering in this price / HP range (I'd actually rather spend closer to $2000-$2500)?

I was looking at the new 4hp Rikon at first and Laguna has a few offerings in that range too, but the quality of the MM16 looks to be way above either of those for just $1000 or so more, and I've been of a "buy once, cry once" mindset lately. Any thoughts appreciated!

Re: Looking at a new bandsaw - anyone have the MM16?

#2

Re: Looking at a new bandsaw - anyone have the MM1

robo hippy

I do have the Laguna 16HD, and got it maybe 6 or 7 years ago, but can't remember. Huge time saver for making bowl blanks because you get a blank with flat and parallel sides. I do prefer their ceramic guides to the roller bearing types. It runs a 1 1/4 by teeth at 3/4 inch apart blade for ripping blanks. Plenty of power for cutting that high all day long. I cut one end off square then stand it on end to rip. Since I made my chainsaw chopsaw though, it doesn't get as much use. I have a friend who has the Mini Max and I haven't checked it out, but in the price range, the two seem to both be good saws. Perhaps the biggest difference is customer service, and Laguna does not have a good reputation for that. I had some issues, and they didn't seem to care. Of course, if I was to make my own saw, it would have a few big differences. One would be a bigger table or at least wings to pop up. The table always seems to be just a bit too small for any bowl blank. The dust collection ports do not suck. They are made for cabinet shops and kiln dried wood. That will be another video clip some time this year. I put a vent in the bottom of the front door where all the wet shavings collect. I would also want the upper blade guide post to be adjustable for fine control so you wouldn't need to adjust your side guides as you raise and lower the blade. Mine was bent when it got here.

robo hippy

Re: Looking at a new bandsaw - anyone have the MM16?

#3

Re: Looking at a new bandsaw - anyone have the MM1

John Lucas

Yes and I love it. My good friend and I went shopping several years ago at the Atlanta national wood show. He was buying not me. We looked very hard at the Laguna and Mimi max. After reading several reviews of the machines on line be went with the mini max. Although we both fell in love with the big powermatic. Don't remember now why Bill decided on the mini max over the powermatic.

Last year I was cruising the local ads and found a mini max 16. I bought it and love it to death. I did have a switch problem and I don't know exactly how old the machine is. The company was very good about helping me.

Re: Looking at a new bandsaw - anyone have the MM16?

#4

Re: Looking at a new bandsaw - anyone have the MM1

Gerald Klug

I really like mi Mimi Max 16 that I bought used. A friend moved up to a Powermatic 20. My turning buddies that have the Laguna 16 are very satisfied but make sure it is not the "light" model.

Re: Looking at a new bandsaw - anyone have the MM16?

#5

Re: Looking at a new bandsaw - anyone have the MM1

Don Evans

Heavy MM16 verse light model. When I got my MM16 the model number for the lighter version was E16.

I also love mine, it is really nice to have a bandsaw that doesn't vibrate. Make sure you level it with the leveler feet and it will sit there all day running smooth as silk.

You will also find that it works best with regular carbon blades, silicon (Wolverines) don't work on it.

Be sure and read the manual as it has flat wheels not crowned like the cheaper made saws, you will need to adjust the blade on top wheel so teeth hang over front edge except for 1/4" blades.

It's made like a tank also.

Service is excellent from them. I think they are still in Texas.

Don

Re: Looking at a new bandsaw - anyone have the MM16?

#6

Re: Looking at a new bandsaw - anyone have the MM1

robo hippy

Laguna did keep calling me for a few years to sell me blades till I told them I had a Lennox bandsaw blade dealer in town. Bimetal works good, and carbide tipped blades for slicing veneers. Here, Laguna may have a better blade than Lennox.

robo hippy

Re: Looking at a new bandsaw - anyone have the MM16?

#7

Thanks Reed, been enjoying your channel. *link*

Chris Hoehle

Thanks, Reed! I've been watching your YouTube channel and it's great! Haven't seen the chainsaw chopsaw one yet but I'll check it out soon.

I've learned some about some things from your vids that I've never seen anywhere else in 7-8 years of turning and reading and watching DVDs and taking classes (and that includes 3 summers of classes at Anderson Ranch). Specifically, the big ugly tool, the fluteless gouge and the use of roughing gouges and continental gouges on bowls, so thanks for that too!

One topic that may be up your alley in terms of obscure stuff that I can't seem to find very much info on would be- what is really the difference between V, U, and parabolic bowl gouges?

(There is this one article that comes up: http://www.peterchild.co.uk/info1/sflute.htm) and a few forum threads here and there but very little else. Glenn Lucas says in his videos that the parabolic flute is the only shape he'll have in his shop, but he doesn't go on to say why and, in terms of personal preference, I am coming down more and more in favor of my crown pro-PM bowl gouge (parabolic) over my Doug Thompson V, but I can't really intelligently articulate why, at least not yet. Maybe food for thought for a future video?

Re: Looking at a new bandsaw - anyone have the MM16?

#8

Thanks for your input everyone!

Chris Hoehle

The MM16 is looking more and more like the way to go... :D

Re: Looking at a new bandsaw - anyone have the MM16?

#9

Re: Thanks for your input everyone!

Joe Herrmann

I have the MM20 and like it. Got it from a place in GA, but can't remember their name off the top of my head. They were good to deal with.

Re: Looking at a new bandsaw - anyone have the MM16?

#10

Re: I have the MM16

Joe Meirhaeghe

I've had the MM16 for a couple of years now & think it's a great machine, built very heavy. I see no reason it shouldn't last my life time. Lot's of power, good resaw height too. The only thing is I wish it had a bigger table. However most band saws have small tables. I keep thinking some day I'll build a table extension for it, I just never seem to find the time.

Re: Looking at a new bandsaw - anyone have the MM16?

#11

I also have the MM16

John Scheideman

I bought mine about 8 years ago and have never regretted it. It is a great saw! The one thing that I did to it was place it on a wooden box to raise it a little. I like my table a little higher than most of them are. I have never had a problem with it and it gets a lot of use. It easily cuts through just about anything with the right blade. I use Timberwolf blades. I ordered mine right from MiniMax. I think their website is on the web. Their customer service is fantastic. I got calls from them for a year or more after buying it just to see if everything was going well. I don't know if they still do that but I sure appreciated it at the time.

I would definitely buy one again.

John