Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Question for John Lucas

Posts

Question for John Lucas

#1

Question for John Lucas

John Kaner

John, which detail gouge from Doug Thompson? Shallow or regular? 3/8" or 1/2"?

I wish I was closer so I could have take classes from you. I've learned so much with your you tubes.

Like everyone else here, I appreciate your sharing your knowledge.

Thank you.

Re: Question for John Lucas

#2

Re: Question for John Lucas

John Lucas

I love my 3/8" Thompson detail gouge. It is second to my 1/2"'Thompson bowl gouge in the most used category. I have 1/2" spindle and detail gouges from Doug I use the 1/2 " spindle gouge for large or longer beads and coves where the detail gouge is too narrow and a skew might not work. The 1/2" detail gouge is reservered for cuts where I have to hang the tool over the too rest a long way such as some inside out turnings. That's where the detail gouges with the shallow flute really shine.

Re: Question for John Lucas

#3

Re: Question for John Lucas

John Kaner

John, so a 3/8" shallow detail gouge would be a good choice?

Re: Question for John Lucas

#4

Re: Question for John Lucas

John Lucas

Yes. I probably have 75 tools of all sizes and shapes. The 3/8" Thomson detail is my second most used tool behind the 1/2" Thompson V bowl gouge

Re: Question for John Lucas

#5

Re: Question for John Lucas

John Lucas

I should tell you I bring it using the same setting as my bowl gouge on the wolverine jig but I put a spacer block in the V slot to move the jig forward which gives me a 35 degree cutting angle at the tip. It also grinds small wings on the sides that I use for special cuts. I also grind quite a bit of metal off the bottom of the bevel so it doesn't get in the way when reaching into tight areas. I have a video that show the spindle grinds but don't know how to link those on my phone. I'm going to try to get my computer working this afternoon. I moved into my fiances house for the next few weeks until our new house is vacant and we can move in

Re: Question for John Lucas

#6

Thank you John Lucas and

John Kaner

I appreciate this great info. You have helped so many others. I'm ordering the 3/8" shallow gouge and a 1/2" spindle gouge for me. For my friend/mentor a 1/2" replacement for his Glasser handle. He has 2" of flute left. For me, I'll wait as I have 4" of flute left on my Glasser handle. I tend to do more spindle turning. He turns more bowls. We basically turn Birch. About all we have...

Thank you for the help and I hope your move is smooth and easy. We had 6 household moves in USAF and I had 3 unaccompanied. Always a pain to pack and then the eventual unpacking...