Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Finishing Laser Engraved wood Pens *LINK*

Posts

Finishing Laser Engraved wood Pens *LINK*

#1

Finishing Laser Engraved wood Pens *LINK*

Mike Brazeau

I do a few pens now and then and have a request to do have laser engraved initials done on one. Assume you would finish after the engraving? I do a plain CA finish and use micromesh and then Hut polish. Does the engraving change things at all when applying finish? Would guess a bit of light sanding might need to be done around the engraving?


The Joy of Wood

Re: Finishing Laser Engraved wood Pens *LINK*

#2

Ric Taylor

Re: Finishing Laser Engraved wood Pens

Ric Taylor

Mike,

I have done many of those. It works best to complete the finish first and then do the engraving.

The engraving will leave a bit of smoke residue on the surface. This is easily cleaned off by dipping a rag into a 50/50 mixture of water and white vinegar to get the rag damp, and a few swipes over the engraved area.

Try it a a practice piece first so that you get the feel for it.

Ric

Re: Finishing Laser Engraved wood Pens *LINK*

#3

Re: Finishing Laser Engraved wood Pens

David Walser

Mike -- Talk with the person who will be doing the laser engraving for you. IIRC, they wanted the pen blank completely finished, but unassembled.

Good luck.