Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

just keeping the photo threads going

Posts

just keeping the photo threads going

#1

just keeping the photo threads going

Mike Potts

My Nikon D3200 24.2 MP CMOS Digital SLR Camera with 18-55mm and 55-200mm Non-VR DX Zoom Lenses Bundle, should be here Mon. along with 64GB SD XC SDXC Class 10 IF3C Professional High Speed Memory Card SDHC 64G (64 Gigabyte) Memory Card for Nikon DSLR D800 D800E D3100 D3200 D5100 D7000. I also Ordered Adobe Photoshop Lightroom 5. Any thoughts on Lightroom 5 ? I was told it is a good program.

Since at this time all my photos will be for my etsy site, I started adding props to my photos. Examples candy kiss, an egg, apples, the reason was to give potential buyers a sense of size of the piece. at this point I have made 8 sales on etsy and 6 had the props, 1 was before I started using them. I get 5 shots per piece, my lead shot is the one with the prop, the other 4 I don't use them. Any one else use this technique?

keep it safe

Thanks Mike

Re: just keeping the photo threads going

#2

Re: just keeping the photo threads going

John Lucas

I think it's a good idea to use some sort of prop for this kind of sale. I would not recommend it for pieces that are for entry into art shows.

Re: just keeping the photo threads going

#3

Re: just keeping the photo threads going

Charlie Anderson

Lightroom is a great program but it does take a while to learn it. One of its strengths is organizing your photos but it does take some 'training' to understand how to use the various (and many) capabilities.

I recommend watching some Youtube videos since the price is right. Training sites like Lynda.com and KelbyOne.com are good but they're subscription sites. (I prefer KelbyOne for Lightroom and Photoshop).

Re: just keeping the photo threads going

#4

Bill Blasic

Re: just keeping the photo threads going

Bill Blasic

Again I'm asking why are we not using the Photography heading for these discussions?

Re: just keeping the photo threads going

#5

Re: just keeping the photo threads going

Charlie Anderson

Now consider knuckles properly rapped!

Re: just keeping the photo threads going

#6

sorry to offend you

Mike Potts

Bill, since I started two of the threads about photography, I'll give you my reasons

1) there have only been two threads started in the photography section in the last two months, the one didn't get any response.

2) both threads I started where concerning trying to get better photos of pieces that I turned, and this is the turning messageboard.

3) We can talk about heating or insulating our shops, or new vac system with no problem.

4) put the OT in front of our message and we can discuss any thing, not even related to wood or woodworking.

5) to my knowledge this is an open forum, if there is something on here you don't want to know about, then don't read it.

Sorry if it seems I am taking this stance but I live in the middle of no where, not close to any clubs to join, I am self taught in turning and wood central has given me a lot of knowledge over this past year+, and when I'm told to take my Questions else where it offends Me.

keep it safe

Mike

Re: just keeping the photo threads going

#7

Bill Blasic

Re: sorry to offend you

Bill Blasic

Guys it is like this in reality I could care less, Ellis gave us a forum for Photography and if folks don't want to use it maybe Ellis should take it down. I check it every day because it is there. I'm not offended but it probably cost Ellis $ to put it there. Ellis lets us more or less self regulate this site where other sites have these zealots who move stuff because they don't think it applies to where it was posted. I read most every word every day no matter where it is.

Re: just keeping the photo threads going

#8

Jim in Burlington Ont.

Re: just keeping the photo threads going

Jim in River Oaks, Ont.

It's a good entry level Nikon. This cropped sensor is very good for an entry DSLR. I shoot RAW, I would hope that you try that too to enable the most from your camera. I have Lr5, I also use Br and Ps6. I use Br as my RAW processor then send it to Ps most often. Lr is quickly becoming a standard that can also export to Ps so you have flexibility there. I also use Nik as plug in's for Lr, Love the B&W version of Nik. You should be fine with your camera, get a good tripod and look up YouTube video's for help, I most often use Lynda.com for help with Lr and Ps. Good Luck!

Take care,

Jim

Re: just keeping the photo threads going

#9

Lightroom is a great photo editor

Mike Foster

I use lightroom as my go to editor now. I also have photoshop and iPhoto but don't use iPhoto at all and rarely use Photoshop anymore. I like the way Lightroom works. You can develop a good workflow and process a lot of photos pretty quickly. It also acts as an organizing library for all your photos, which is awesome. The other really cool thing about lightroom is that all of the adjustments that you make to a photo are non-destructive. That is you can tweak the photo all you want and save it that way and whenever you want to do something with it, it is there. But, if you want to revert back to the original photo, it is as easy as a button click. This is because lightroom makes a file that holds all the adjustment tweaks you make to a photo, but leaves the original file untouched. That feature is pretty unique to lightroom and what really makes it a very cool program in my eyes.

Re: just keeping the photo threads going

#10

Thanks guys

Mike Potts

Thanks for the info that was shared in this thread.

Just got the Nikon d3200 and sd card today, the battery is on charge and I feel like a kid waiting for x-mass. My lightroom was on back order but the order was filled today so I hope to have it before the week-end.

thanks again for the help, I'll post some photos once it get things figured out

keep it safe

Mike

Re: just keeping the photo threads going

#11

Jim in Burlington Ont.

D3200 Set Up *LINK*

Jim in River Oaks, Ont.

You might want to watch the following video on setting up the D3200, he goes from super basic to functional menu set up…I follow Jared, he's a bit of a nut but I find his info right on and FUN… enjoy!

Take care,

Jim


Jared Polin, D3200 set up

Re: just keeping the photo threads going

#12

Re: D3200 Set Up

Mike Potts

Thanks Jim, I found that u-tube video, and have watched it once. I think watch it again today.

keep it safe

Mike