Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

My new lathe leaves Arizona tomorrow

Posts

My new lathe leaves Arizona tomorrow

#1

My new lathe leaves Arizona tomorrow

Dick Coers

I got a bit of a shock when I received the crating quote from the riggers, but thought I didn't have much of an option. They were prompt and really professional, so gave them the go ahead. Then I saw the skids! I'll be able to build a shed from the wood they used. Maybe I under estimated the size of this lathe a little? 2500 pounds of cast iron heading my way. Looks like still going to be under $1 a pound to my door. LOL Picture 1 is the lathe of course, pic 2 is the bed extension!


Re: My new lathe leaves Arizona tomorrow

#2

Re: My new lathe leaves Arizona tomorrow

Dale Bonertz

Dick,

That should turn some nice goblets. Not sure it is big or heavy enough for bowls though. :)

Re: My new lathe leaves Arizona tomorrow

#3

Dennis in Southern Oregon

Re: My new lathe leaves Arizona tomorrow

Dennis in Southern Oregon

Loooong stemmed goblets!

Re: My new lathe leaves Arizona tomorrow

#4

Re: My new lathe leaves Arizona tomorrow

Rum

Yah, just think of the size of the trembleurs you can make :D

Best reckoning you'll need about 15 string steadies unless you're really careful...

Re: My new lathe leaves Arizona tomorrow

#5

Re: My new lathe leaves Arizona tomorrow

Phillip Medghalchi

Dick, are going to turn parts for this new space programs that gonna take people to the Mars? Man that lathe is huge. You can have an army of turners on it at one time, and all will have some parts to turn, all in line to each other. I think if you put anything out of round on it will shake the concrete foundation from under that lathe. Have fun on it.

Re: My new lathe leaves Arizona tomorrow

#6

Dick Hines

Re: My new lathe leaves Arizona tomorrow

Dick Hines

Looks to me like you are planning on turning prop shafts for ships.

Re: My new lathe leaves Arizona tomorrow

#7

Re: My new lathe leaves Arizona tomorrow

Keith Newton

OH, I was thinking you were in AZ.

It is hare to tell in those small images, but I would sure like to get that tailstock or whatever I'm seeing on the left end of that first image, down on the pallet, rather than up there on top. Of course, I would have taken the motor off too.

I like that the extension is easily removable. Easily! ha, Even though I have a pretty large shop, I think I would normally have it set up without, then snap it on when I needed that extra length. SNAP!

Re: My new lathe leaves Arizona tomorrow

#8

Re: My new lathe leaves Arizona tomorrow

Dick Coers

They have it bolted and steel strapped to the skid. That big orange section is a two head copy attachment on a powered cross slide. It's big, but not that heavy in comparison to the machine. The motor is actually pretty low in the machine, about level with the bottom of the bed.

This thing is a flight of fancy of sorts, I really got caught up in the low price. I'll get it to my door for the machine price of a new Jet 1642. I've been turning a lot of furniture parts of late, and have worked with a church restoration company in the past. They will be the first place I solicit work. They have talked to me several times about buying spindle samples to help their marketing. I've always hand turned for them in the past. I'm active in an arts group here in Peoria, IL and want to do some simple Tuscan columns for display. Of course those will now have price tags on them along with the art. Maybe not the best way to sell the art, because I have always been told to not detract from the point of interest.

Just can't help thinking I can get my money out of this pretty quickly if necessary. But the bottom line is I bought it to have fun. It's pretty cheap fun so far! Hope it's not like buying a cheap used boat, it's about that big!

Re: My new lathe leaves Arizona tomorrow

#9

Re: My new lathe leaves Arizona tomorrow

Phillip Medghalchi

Dick, I did not see your front loader or lift to place that lathe in your shop and I guess you will never move that lathe to clean under it? :D

Hope you crank up some nice stuff to sell soon to pay for that toy.