Re: Sweet - twisting
Rum
This piece wasn't to bad but your characterization of the wood is pretty spot on.
From what I've talked with my cousin about it the trick with Pistachio is to let it dry reeeeaallly slow. He's on the southern Oregon coast where its 80+% humidity all the time and it seems to like it there. His brother does wood carving and lives over more on the dry side around Klamath falls - he'd gotten a bunch of pistachio billets in the 4"x4" to 6"x6" size range that weren't completely dried and over the course of a month or so they literally twisted themselves apart.
Once its dry it doesn't seem to move much at all. He has a bunch cut for fret boards and those pieces seem quite stable at the roughly 1" by 4" billet size after the initial rejections are tossed (the top 3-4 layers of the pallet I pulled open was a bit wobbly, the bottom pieces pretty much all looked good).
This piece was rough turned to almost 1.5" thick (a bit thicker than I'd have rough turned it perhaps) and dried in his shop for a year or so before it came over here. It had one small crack on the end grain that started wanting to open up, so I hurried up and finished it and it seems to be ok after about 3 weeks so, we'll cross our fingers 