Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Guess I'll get more interested in spindle turning

Posts

Guess I'll get more interested in spindle turning

#1

Guess I'll get more interested in spindle turning

Dick Coers

Because I bought another lathe tonight. I watched the auction end this afternoon with no bids, and he relisted it for 24 hours with an $800 buy it now. I couldn't resist! The lister is a business liquidator, so not a lot of help with specifics. It's across the country, and had to get a bid from a rigger to break it down and freight quote to ship it. Should slightly more than double the price, but will have 149" between centers, and 15.75 diameter over the powered, 2 head copier. I should know next week if the gamble pays off. Ebay makes me nervous, but put it on the credit card through PayPal in case of trouble! I'm going to need a M45x2 to M33x3.5 adapter if I want to run a chuck. Anyone know where to get one made or ordered?


Re: Guess I'll get more interested in spindle turning

#2

Re: Guess I'll get more interested in spindle turn

John Lucas

Vic at Bestwoodtools.com can make you one.

Re: Guess I'll get more interested in spindle turning

#3

Re: Guess I'll get more interested in spindle turn

Dale Miner

If a spindle adapter is all you need, you are one lucky man. I would need a variance to build another outbuilding to put it in, and then permits for the building, electric permits for the wiring, a paved driveway to the door to meet code, etc, etc, etc.

Looks like one great lathe in the pic. What make is it?

Re: Guess I'll get more interested in spindle turning

#4

Re: Guess I'll get more interested in spindle turn

Keith Newton

Wow, Yes, I guess you had better start working on that. This may be one of those time where you have to be careful what you wish for. I've thought several times, and actually bought one that size before, only to decide that it took up too much shop space, for no more often than it would be used.

But hey,,,,,,,, I'm sure you can use always another 12' long shelf for fasteners and leftover finishing supplies. he he

That does look like a really good one. I could have used it on a project a few months ago, when I turned 8 post 5" X 5" X8' for a victorian house. I hope it comes with a nice big steady rest too.

Re: Guess I'll get more interested in spindle turning

#5

Re: Guess I'll get more interested in spindle turn

Roger Chandler

I see porch posts and decorative columns in your future Dick! Wow......what a machine! I guess you will make this a business adventure, and not just a hobby because you like long decorative spindles just propped up everywhere against the wall.......just to say you did that! ;)

That has a real potential as a money maker in filling construction orders and such for home restorations, etc.

Good luck with it, and be sure to post a few pics when you get it in and set up in your shop......that will be an interesting post for sure!

Re: Guess I'll get more interested in spindle turning

#6

Hapfo AP 6000-es *LINK*

Dick Coers

Here is a video of a newer Hapfo machine, but same two head, powered copy head. The video looses a little bit since you drop both heads and make the part in one pass. He also doesn't have the follower bearing running in front of the first cutter. That comes with a roughing knife. This one will go in my friends furniture making shop. I've been working there part time, turning furniture parts, in exchange for shop space. He also has my 24" Yates American planer.


Hapfo video

Re: Guess I'll get more interested in spindle turning

#7

Re: Guess I'll get more interested in spindle turn

Rum

Wow, that's quite a machine! Really would open up some interesting architectural options with the automatic duplicator.

Those cutters took a lot more of a bite than I'd have thought they would. For really big stuff you must still need some way to adjust them out and take multiple passes.

Re: Guess I'll get more interested in spindle turning

#8

Re: Guess I'll get more interested in spindle turn

Dick Coers

On my machine, they used a split arm on the follower and cutter holder. You turn a crank and it will increase or decrease the cut. That is the fine adjustment. For gross adjustments, the tool holder lets you slide the tool up and down. I was also surprised at the bite they took. A definite need for dust collection! Looking forward to the Christmas production run of french rolling pins this year. Maybe less than 2 minutes turning time!

Re: Guess I'll get more interested in spindle turning

#9

Re: Guess I'll get more interested in spindle turn

John Jordan

Your 1-1/4 chuck will screw right on the m33. It s a little loose until the shoulders touch. I've done it quite a lot with no ill effects and no chance of damage. To me that's better than adding the length of an adaptor. Of course you could get a new adaptor for the chuck. I may have a Stronghold m33 if thats what you need.

That's quite a buy you got there, Dick. :D

John

Re: Guess I'll get more interested in spindle turning

#10

Re: Guess I'll get more interested in spindle turn

terry quiram

I know this won't fit your space. Are you storing it in James shop? He is going to need a bigger building.

Re: Guess I'll get more interested in spindle turning

#11

Yes it is

Dick Coers

No way it would fit here! He is selling more and more wood screw pieces, so he will also be using it for those 3"x6' long blanks to be threaded. What he really wants me to bring down there is a CNC router. Speaking of James, he won an excellence award at the Baltimore ACC Show yesterday!

Re: Guess I'll get more interested in spindle turning

#12

Re: Yes it is

Don in Central Illinois

Great news for James. And great buy, can't wsit to seeit.

Re: Guess I'll get more interested in spindle turning

#13

Thanks