Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

The topic of steel. Not quite OT. *LINK*

Posts

The topic of steel. Not quite OT. *LINK*

#1

The topic of steel.  Not quite OT. *LINK*

Craig Daymon

Saw this in the news today. Sounded interesting, though it does not have an impact on tool steel since we grind our edges and would grind away the advantage. Still, something may come of it.

Steel made 10x stronger via a nano-manufacturing process similar to electroplating. Might be worth reading and watching to see if it proves somehow useful.


Nano-manufacturing to make steel 10x stronger

Re: The topic of steel. Not quite OT. *LINK*

#2

Re: The topic of steel.  Not quite OT.

Craig Daymon

Should say that this may be a way to apply the steel we see from Crown Pro-PM, Thompson, D-Way and others applied to the edges of large cutters/equipment which would be too large, and therefore costly, to make completely out of powdered metal steel.

Re: The topic of steel. Not quite OT. *LINK*

#3

Re: The topic of steel.  Not quite OT.

robo hippy

There is a place locally that offered some thing like this to me some years back, an electroplated type coating that was being used on some things for the lumber mills. I never did try it, but sounds like the same thing. I would think that you would not be able to hone the top surface though.

robo hippy

Re: The topic of steel. Not quite OT. *LINK*

#4

Re: The topic of steel.  Not quite OT.

Ralph Lindberg

High tech pattern welding...

Re: The topic of steel. Not quite OT. *LINK*

#5

Dennis in Southern Oregon

Re: The topic of steel.  Not quite OT.

Dennis in Southern Oregon

The article says stronger, not harder, and you can't be sure from the context which they mean. It could be Stronger because of the corrosion resistance.

Re: The topic of steel. Not quite OT. *LINK*

#6

high carbon steel

John Lucas

I know we get carried away sometimes talking about all the new steels and edge holding. I just finished using my carbons steel 1/4" parting tool because my other 2 are packed heading to demos. It works just fine and if I remember correctly it cost me $2.50. Sure I stopped to sharpen it once but that took all of 15 seconds and that included walking to the grinder and back.

Take whatever tools you have, learn to sharpen and use them and enjoy them. If you save up and buy better tools later it will just enhance your enjoyment on the lathe.

Re: The topic of steel. Not quite OT. *LINK*

#7

Re: high carbon steel

Barry L Elder

True, I am a skeptic about many of the "theories" being developed, but, it still amounts to coulda, shoulda, woulda! The "Big Bang" theory is just that: a theory! When it is in production, then it is real! ;)

Re: The topic of steel. Not quite OT. *LINK*

#8

Re: The topic of steel.  Not quite OT. *LINK*

David Walser

As long as we're wishing, here is a research paper on the topic of "friction stir processing" (FSP) of steel to produce a more durable, sharper edge. FSP involves jamming a spinning hardened probe into steel plate. The process can be used to join two pieces of steel, in which case it's called friction stir welding. The friction stir process changes the molecular structure of the steel, leaving it with smaller grain size and a greater concentration of carbides. It would be nice if this process could be used on our skews and gouges.

It would also be nice if someone would use the methods described in the paper for measuring turning tool sharpness and durability.


FSP used for knife edges

Re: The topic of steel. Not quite OT. *LINK*

#9

Re: The topic of steel.  Not quite OT.

John Lucas

Wow that's pretty cool. I spent some time looking and still didn't find instructions for how this is done other that a rough description of the spinning rod. Wonder how deep it goes. It would seem like it's not that deep so it's good for a knife or Razor but on a turning tool where you gradually grind it's length It would seem like you would grind through the FSP treated area. Very interesting. Something to keep an eye on.