Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Cold Weather thoughts and opportunities

Posts

Cold Weather thoughts and opportunities

#1

Cold Weather thoughts and opportunities

Keith Newton

I was out grabbing some wood a little while ago, and was eyeing some Catalpa which was riddled with carpenter ant tunnels which I find intriguing. Yet to turn such a piece, crotch, would probably lead to lots of chipping off into the cavities, spoiling the natural beauty. But there is an easy way to avoid this, this time of year, by immersing the blank in a bucket of water, then freezing it, before putting it on the lathe. The ice in the cavities would back up the problem spots, then after the ice melts, you look like you have really done something.

Working in a cold shop keeps the ice happier through the process, than a warm one. Of course "a man needs to know his limitations" as Dirty Harry would say, so I wouldn't count on the ice having great tensile strength, and would probably wrap the outside with plenty of fiberglass packing tape after the shape is established.

And of course, even punky wood gets easy to get a clean cut on when wet and frozen, and can be made pretty solid with CPES after it dries.

Just seeds for thought. K

Re: Cold Weather thoughts and opportunities

#2

Re: Cold Weather thoughts and opportunities

john Veerkamp

With really wormy wood, I haven't had much problem with the tearout issue. Use very sharp tools and a light touch. I've turned wormy locust, soft maple, butternut, mesquite and osage orange. I've never turned catalpa so it may behave differently. Wrapping the outside to give support is a good technique. Shrink wrap or I use cheap vinyl electricians tape.