Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

is turning your hobby or is building a shop

Posts

is turning your hobby or is building a shop

#1

is turning your hobby or is building a shop

John Lucas

Taking a break from packing. How many of you find building and organizing the shop and/or buying and reconditioning a new tool to be a major part of this hobby. I'm kind of on the border of this one. I do love turning and woodworking in general. However buying a new or used tool and learning to work with it is just as much fun and makes you smile at the end of the day. God only knows what I'd own if money was unlimited. Can you get a trailer for a Porche to haul wood. :)

I know some guys (and I'll soon be one) who spend all their time building cabinets for the shop. Keeps you out of the wife's hair. Of course Lucy has already made plans for me to build a few things. I'll put them off for a little while until I get the shop organized.

I do have lots of turning to do and hope the building the shop doesn't take over my life.

Re: is turning your hobby or is building a shop

#2

Steven Antonucci

I know some guys like that

steven antonucci

Never really see them turn, but man is their shop organized!

If I was starting over, I'd never be built like I am today. But, I am here now and rebuilding would take a year (or at least a summer)...besides, it works for me?

And I'd feel guilty in a shop that was that organized... messing it up and such!

S

Re: is turning your hobby or is building a shop

#3

Dan Jechura

Re: I know some guys like that

dan jechura

I do both. When I worked on the house 28 years ago. My shop was up front and along side the cars ( 24 X 28). Table saw on the back wall and work bench under the window to the left. Worked mostly off milk crates. Then I added on a 28 X 14 addition 6 years ago. Opened up the wall between the new addition and the old garage. I made a better bench under the window and made tables benchs on both sides of the radial arm saw with storage for the table saw under the table when not in use. The new addition was cold storge and a place to pull the boy scout trailer in to work on it. Now all the tools and benches are in the new addition, the walls in the old part of the garage have bowl blanks stacked up. I'm out of scoutting ( 28 years), I can still get 2 cars in the garage area. An I am closing of the wall with moveable doors so I can heat the addition better. I should be doing flat wook, but I turn most of the time.

Re: is turning your hobby or is building a shop

#4

Re: is turning your hobby or is building a shop

Bill Howatt

I have to admit that I had a lot of fun building the shop.

The real bonus in building the shop was that I didn't screw up a lot of expensive wood trying to make something from it :).

Bill

Re: is turning your hobby or is building a shop

#5

Alan Zenreich

Re: is turning your hobby or is building a shop

Alan Zenreich

Every time I put in a new tool, I have to do some reconfiguring of the shop. Whether it be lighting, electrical, dust collection, fixture building... there's always some shop tweaking going on.

Because I don't earn my living in production woodturning, I consider all aspects of the shop and its activities part of the hobby.

I enjoy learning acquiring new toys/tools, and learning the skills necessary to use them. Actually making items is a bit incidental... it's really all about enjoyable time spent in the shop.

There's always something churning around in my brain to help with shop tasks... I'm testing out some new toys now that may be of interest to this group in the near future.

Re: is turning your hobby or is building a shop

#6

Lyle Jamieson

Re: is turning your hobby or is building a shop

Lyle Jamieson

I think most of us will never get the shop done, there is always some way to fine tune the space or add a new tool here and there. Keep it simple and make it functional to start and let the details fall into place over time. I always suggest follow the fun. Both shop creation and turning are enjoyable. The key for the shop is to eliminate obstacles, eliminate tolerations. Starting fresh gives you a chance to do it right the first time. Enjoy the ride.

Re: is turning your hobby or is building a shop

#7

Re: is turning your hobby or is building a shop

Jeff Smith

My wife and I have decided to downsize with he expectation that I will be fully retired in 2 years. The big house is on the block now, and we've found our dream house. Only problem is, no garage or shop. The property is on top of a bluff on one of the prettiest islands in the NorthWest with a gorgeous view and plenty of woods.

I'll get to build a shop from scratch. Planning on having a pole and frame building with a guest room over the top built, then customizing into my shop below. Won't be too big - 24 x 24 max footprint, but it's going to be fun in the planning.

The other problem is that I'll be without a shop from the time our current place sells and when we can get the shop up and running. It could be as long as a year with most of my equipment in storage. Not looking forward to that part...so to answer your question - turning is my hobby, but I'm going to have to build a shop before I can enjoy it.

Re: is turning your hobby or is building a shop

#8

Dan Jechura

Re: is turning your hobby or is building a shop

Dan Jechura

You could put up a big tent :D :D :D

Just kidding

Re: is turning your hobby or is building a shop

#9

Re: is turning your hobby or is building a shop

Randy Johnson

My shop was a termite infested two car garage that would not even be standing if I had not rehabilitated it for a shop. The entire building had to be jacked up to replace the sill plates, the Masonite walls and ceilings were removed and replaced with 5/8 drywall, and the existing wall insulation was replaced along with a thick blanket of blown insulation in the attic. I rewired the building from the weatherhead down, adding a 200 amp service to replace the existing 60 amp one. I have had to go back and add some surface mounted EMT for a few things.

After all the machinery was in place I spent a few weeks getting the cyclone system in place.

The last thing I wanted to do was build cabinets. I have shelves and a large floor cabinet bought at the annual school surplus auction, and the wall cabinets were salvaged from a friend's son's kitchen remodel. I hope one day to replace those with some hometown built American Kitchen cabinets from the 40s and 50s. They are metal, and what they may lack in style they make up for by being built like a tank. The town is full of them and it is just a matter of being at the right place at the right time.

A few years ago I installed a metal roof, and scrubbed and repainted the aluminum siding. I do plan to make a wall hung hand tool cabinet in the near future, but hopefully that will be the end of shop improvements.

I want to work in the shop, not on the shop.

Re: is turning your hobby or is building a shop

#10

Re: is turning your hobby or is building a shop

John Lucas

I'll be starting with just a plain garage. No insulation,no interior walls, not enough electricity. It does have an extra room that will probably become my metal working shop with storage for chemicals other things that don't go in a woodshop. A lot of work to do and I don't know how long it will take a contractor to do the wiring and add a small attachment for the dust collector and air compressor.

I do plan to build custom cabinets because I don't think existing ones fit the tools and supplies well enough.

Re: is turning your hobby or is building a shop

#11

Re: is turning your hobby or is building a shop

George Hurlburt

John it will be time to call in IOUs' you have built up over the years. You will be needing some people power and it will help to get the younger guys to do some of the heavy lifting.

Re: is turning your hobby or is building a shop

#12

Dennis in Southern Oregon

Re: is turning your hobby or is building a shop

Dennis in Southern Oregon

Maybe it's what you mean by "small attachment", but for the sake of your hearing try to put the dust collector, air compressor and vacuum pump in a different room than the woodworking equipment. It would seem that your potential metal working room might be a good place for them, because these items would not be running when you are doing metal work. Just a thought.

Re: is turning your hobby or is building a shop

#13

Hmm ????

Ray Carson - Lawrenceville, NJ

Does a person ever really STOP refining or building the "shop." I thought a person is always tweaking and fiddling with things to make them better.

Am I the abnormal one? On second thought, don't answer that. :D

Ray

Re: is turning your hobby or is building a shop

#14

Re: Hmm ????

Jeff Smith

Don't wish to be morbid, but - That's exactly how the Winchester Mystery House in San Jose came to be...the heir to the Winchester fortune believed she would stay alive as long there was construction going on on her house. Doors that open onto solid walls, or into mid air, stairs to no where (end at the cieling)...