Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Barracuda CSC2000C Chuck

Posts

Barracuda CSC2000C Chuck

#1

Barracuda CSC2000C Chuck

Bill Phoenix, MD

Fellow Woodworkers,

Recently I inherited an old Montgomery Wards lathe. I plan on learning to use it and make small projects. Thinking of buying a Chuck for it. The arbor is 3/4 x 16 TPI. Would the Barracuda CSC000 be suitable for this machine and my needs? Is there any history about it's quality? Thanks for your help.

Bill

Re: Barracuda CSC2000C Chuck

#2

Re: Barracuda CSC2000C Chuck

Ron Bauer

Bill, I have a Barracuda 3000 chuck (along with two Vicmarc's and a small Nova). It was the first one I bought when I started turning. At the risk of starting acrimonious dialog I think it will be just fine as a starter chuck. I still use it in some applications because it came with a variety of inter changeable jaws. Just know that you are limited by safety in the size of your piece. If you are doing bowls they will need to be small, or use the face plate or face plate+glue block method for mounting larger pieces. BTW, My first lathe was an old Walker-Turner.

Safe Turning, Ron.

Re: Barracuda CSC2000C Chuck

#3

Re: Barracuda CSC2000C Chuck

Dick Coers

Only you can judge if it will fit your needs, we have no idea what you turn. The old adage of you get what you pay for, always applies to tools. With any tool at the lower end of the price range, you get folks that love it and those that hate it. You'll just have to get one and see what you think.

Re: Barracuda CSC2000C Chuck

#4

Re: Barracuda CSC2000C Chuck

Bill Marr

Ron,

Thanks for your honest feedback. Since I'm not sure how far I'm going to go with turning, I thought I'd try to get a Chuck to hold a blank that would allow me to drill or hollow out the end for various small projects. Working between centers all the time can be somewhat limiting. At this point turning bowls is far out on my horizon but I understand that this Chuck has it's size limitations. Sounds like it might be a good starter for me.

I appreciate your help.

Bill

Re: Barracuda CSC2000C Chuck

#5

Re: Barracuda CSC2000C Chuck

Bill Marr

Thanks Dick.

Re: Barracuda CSC2000C Chuck

#6

Keith Tompkins

Re: Barracuda CSC2000C Chuck

Keith Tompkins

HI Bill,

I think it will work just fine! Besides, you'll be buying a new, bigger lathe soon anyway!

Re: Barracuda CSC2000C Chuck

#7

Re: Barracuda CSC2000C Chuck

Bill Marr

My thoughts exactly! Thanks Keith.