Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Follow-up on "something new"...Prism Paint *LINK*

Posts

Follow-up on "something new"...Prism Paint *LINK*

#1

Follow-up on "something new"...Prism Paint  *LINK*

Ed Davidson

It's been a long time since I've published a turning related video. Just got a new Garmin Virb HD camera and had to try it out. The YouTube link is shown below, as well as a photo of the semi-finished product featured in the video.


img

YouTube Video - Embellishing with Prism Paint

Re: Follow-up on "something new"...Prism Paint *LINK*

#2

Re: Follow-up on "something new"...Prism Paint

Scot in Falcon

Those look great! Thanks for posting the video.

Scott

Re: Follow-up on "something new"...Prism Paint *LINK*

#3

The finished product *PICS*

Ed Davidson

Thanks Scott...here are some finished yoyos using this new process. The 1" diameter logo in the center is made from an inkjet printout on photo-grade paper, and covered with a protective epoxy-dome.




Re: Follow-up on "something new"...Prism Paint *LINK*

#4

Re: Follow-up on "something new"...Prism Paint

David Walser

Ed -- Thanks for posting the video. I hope it will be the first of many.

Questions: How do you prepare the surface for accepting the Prism Paint? It looks like you simply cut a groove, but I couldn't tell if the groove has a flat bottom or if it's more of a cove. Also, in some of photos it appears that the paint has filled the groove and might even be domed above the surface of the yo-yo. Is that the case? Finally, the paint appears to have a very glossy surface. Is that they way it dries or did you coat the painted surface to give the prism paint greater shine and depth?

Re: Follow-up on "something new"...Prism Paint *LINK*

#5

Re: Follow-up on "something new"...Prism Paint  *LINK*

Ed Davidson

It doesn't matter if the bottom is curved or flat. But you do need a sharp 90 degree edge at the top so the paint can have a containment-edge and make a nice straight border. Other than that, there's no further prep needed. The paint is very sticky and will adhere to just about any surface.

The thicker the paint is when applied, the larger the prism effects will become, so I pour it pretty thick. After the paint is fully cured (3 days), it will have shrunk to about half the height that you started out with, so no...it does not hold a dome shape. It'll actually end up concave shaped.

After it's cured, the paint has a moderately shiny surface, but I always add a coat of clear resin on top to protect the paint, and give it that real glossy (and domed) look. There's a link to the final-coat resin I use below.





Sun and Moon Glaze

Re: Follow-up on "something new"...Prism Paint *LINK*

#6

Re: Follow-up on "something new"...Prism Paint

DavidWalser

Ed -- Thank you for the clear explanation. I appreciate the insights.