learned something new yesterday
John Lucas
while I was making the 3 sided knobs I needed to use the parting tool on the tenons. It was a fairly long spindle and after turning most of the knobs it was quite thin at 4 places. This made the parting tool cuts chatter. After fighting it with very delicate cuts I figured out that if you push the side of the tool into the wall you are cutting it reduces the chatter considerably. In other words while pushing straight in I also apply pressure on one side of the tool against the wall being cut. You still have to make multiple passes to get the depth so I would make one cut pushing against the left wall. Then move the cutter over and make another cut on the right wall. Not sure how useful this would be but it was interesting.



