Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Tutorial on turning Pepper mills?

Posts

Tutorial on turning Pepper mills?

#1

Tutorial on turning Pepper mills?

Barry Irby

For those of you that make pepper mills, Where can I get a tutorial on turning them?

Where do you buy the supplies? Are the mills superior to the ones you get in manufactured mills? What other tools do you need? Drill bits?

What size mills do you make? Any tips or clues would be appreciated. What to avoid? What wood and what size?

I am always looking for something to make as gifts. Two of my friends indicated they would love to have one.

Re: Tutorial on turning Pepper mills?

#2

check out Nick Cooks article  *LINK*


http://www.nickcookwoodturner.com/articles.htm

Re: Tutorial on turning Pepper mills?

#3

Re: Tutorial on turning Pepper mills? *LINK*

Stuart Johnson

Brandan Stemp has a three part video on youtube. I like the Crush Grind shaftless mill. Either kind can be purchased from most turning suppliers or Chef Wares.


Brandan Stemp Crush Grind Mill

Re: Tutorial on turning Pepper mills?

#4

the first thing you have to decide...

GaryG in MD

...is whether or not you want that knob on the top.

The trad unit has the knob.

The CrushGrinds do not -- and they come with or without shaft.

Making one of any kind is definitely a "learning" experience.

There are many pitfalls along the way.

Another thing you need to decide early in the process is if you want to achieve a grain match across the boundary. If you do (and you probably will), that puts certain requirements into your procedures. If you work with a laminated blank, this is a must. Check out my Gallery shots, and you'll see a couple I made.

I highly recommend books by Chris West. Such as

http://www.amazon.com/Turning-Salt-Pepper-Shakers-Mills/dp/1600853986/ref=sr_1_1?s=books&ie=UTF8&qid=1420501080&sr=1-1&keywords=chris+peppermills

...GG