Steaming!
Keith Tompkins
An "in progress" photo if something new I'm working on. Turned from green Bradford Pear, 1/16" thick, cut open and steamed. I think there are numerous design possibilities here. All comments welcome.
Knowledge You Can Build On — Est. 1998
Steaming!
Keith Tompkins
An "in progress" photo if something new I'm working on. Turned from green Bradford Pear, 1/16" thick, cut open and steamed. I think there are numerous design possibilities here. All comments welcome.
Re: Steaming!
George Guadiane
Looks like it could become a lily.
Adding more "petals?" Pretty much herever you want to take the idea!
As usual, VERY nice
Re: Steaming!
don stephan
May I ask if you literally placed in steambox, or microwaved the green wood? I tried microwaving a thin green wood bowl once until it was too hot to handle, and it still wasn't flexible.
Re: Steaming!
Keith Tompkins
Thanks George, Liked your ornaments! Nice. I've got a few ideas for this!
Re: Steaming!
Keith Tompkins
Hi Don, I put this in a pot of boiling water on the kitchen range, with the lid in place. The part to be bent was above the water line, in the steam. The wood was freshly cut, turned thin...end grain hollowed right on the pith. It bent easily. Some woods are good for steaming such as white oak, ash, hickory. Apparently Bradford Pear also, despite how brittle the wood is. Yeah, it was HOT.
Re: Steaming!
George Guadiane
I'm sure you have tons of ideas!
Thanks for the comment on the ornaments.
Between you and Steve Sherman, I've been able to see some of the best final work around, AND, I've got a long road ahead before I nail the form and get consistency.
Re: Steaming!
Don Orr
Well this has all kinds of potential especailly in your hands. Looking forward to where this ends up.
Re: Steaming!
Keith Newton
So keith, You say the grain is running left to right in this photo? I've done plenty of steam bending, but never across the grain. I'll have to give that a try sometime.
Re: Steaming!
Keith Tompkins
Thanks Don for the vote of confidence! Keith, what you seen in the pic is the growth rings circling the piece; it is turned end-grain, not bowl-grain direction. Thanks!
Great idea
GaryG in MD
Can't wait to see where you go with it. ...GG
Re: Steaming!
Keith Tompkins
Thanks everyone for the positive comments....I'm going to have some fun with this! 
Beautiful curves
Aage Rendalen
Love the lines! Great idea.
Re: Steaming!
Phillip Medghalchi
Keith beside being unusual, I wonder what color your Bradford pear was to begin with? I was under the impression that Bradford Pear was kind of golden brown with a tannish hue to it. At least mine is that way.
I wonder if steaming lightened the color a bit. I like many others are waiting to see where this idea is going.
Beautiful work nontheless
Re: Steaming!
Keith Tompkins
Hi Phillip, Thanks! The color didn't seem to change after steaming...the wood was cut fresh, and was light colored, much like maple. I does darken over time to a more golden-brown..
Re: Steaming!
Phillip Medghalchi
Keith, thank you for clarifying that. it appears that the Bradford Pear logs I had (I know for sure) been sitting on my friend's front yard on the grounds for awhile before we got acquainted. However, I loved the way it spalted and turned to that beautiful golden brown color. Now, I know if I get my hands on some more, then expect to have it just about the color you started with.
It sure is a very nice wood to turn. I am on the watch out for some more. Of course I love to get my hands on some of those nice maple you guys have up north.