Sea Urchin Treatment
Stuart Johnson
What finish works well on Sea Urchin ornaments, possibly colored but more than likely clear?
Knowledge You Can Build On — Est. 1998
Sea Urchin Treatment
Stuart Johnson
What finish works well on Sea Urchin ornaments, possibly colored but more than likely clear?
Re: Sea Urchin Treatment
Bill Howatt
I don't put any finish on the shell part.
Bill
Re: Sea Urchin Treatment
Craig Daymon
I just finished my first of these this year. The top cap and finial were made from Jatoba closest to the shell and some kind of rosewood (with a really neat grain pattern - maybe Kingwood?) for the longer part of the finial and for a bead on the top cap. I sanded al the wood parts to 1500 and connected it all together with a center dowel, rather than gluing to the shell.
I just finished the wood parts with Conservator's Wax. Looks really good. (Bias applied, of course.) Conservator's wax is a microcrystalline wax that is not suppose to show finger prints and you only need to use a little bit.
Re: Sea Urchin Treatment
George Balock
Stuart,
I generally finish the cap and finial with Behlen's Woodturner's wipe on finish. These parts are typically made from some exotic that likes that finish. I then finish the shell with Krylon Acrylic, matt or gloss depending on my mood.
George
Stuart, Ed Moore showed us how to....
JamieDonaldson
...strengthen the shells with Krylon Triple Thick Crystal Glaze, and it works well.
Re: Stuart, Ed Moore showed us how to....
Phillip Medghalchi
Stuart, where are the pic.s. they sound nice, we would like to see pic.s.
Ed Moore strengthened the shells with...
Mike Stafford
Triple Thick Krylon glaze but finished with spray lacquer.
If you wish to dye the shells I have had more success dying first with aniline alcohol dyes followed by the Krylon glaze and finally the lacquer.
The shells are very porous so you have to be careful about your dye strength.