Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Collet chuck video

Posts

Collet chuck video

#1

Alan Zenreich

Collet chuck video

Alan Zenreich

Here's an advance look at my most recent video for the AAW Woodturning Fundamentals series. http://vimeo.com/114698045

Re: Collet chuck video

#2

Re: Collet chuck video

kvaughan

The morse taper collet is that -- a collet.

Ditch the " chuck" word and it is spot on --

It may be worth noting that not all lathes are compatable with the tail stock ram advancing with a draw bar installed but perhaps it is in the audio. I got no sound while watching it on a tablet. On the other hand I do not get Vimeo visual on the computer, but do get sound.

Re: Collet chuck video

#3

Alan Zenreich

Re: Collet chuck video

Alan Zenreich

You are right, the item displayed is just a collet.

However, I've heard the term used both ways, because on can "chuck up a drill bit" in a collet. So, I opted for that usage.

My next video will show spindle mounted collet chucks that hold interchangeable collets (for example ER-32).

And yes, I make it quite clear that drawbars only work with tailstocks that are non-ejecting.

I look forward to your comments when you get to hear the audio.

Re: Collet chuck video

#4

Excellent resource!

Geoff Whaling

Excellent video and safety advice.

The Nova Mercury mini/midi lathes were manufactured with a collet nut and four collets available for the tail stock. It was brilliant on a mini lathe, no need for reversing mandrels etc. I used the collets quite a bit and had my new Vicmarc VL150 lathes tail stock customized with a 1" x 10 tpi thread so that I could use my Vermec collet chucks on the new VL150.


Re: Collet chuck video

#5

richie croce

Re: Collet chuck video

richie croce

Very cool method I never thought of putting a collet in the tailstock to hold 3/8 shank bits. I like it better than using a drill chuck. Ya learn something new everyday Thank you.

Re: Collet chuck video

#6

Alan Zenreich

Re: Collet chuck video

Alan Zenreich

Something that's so matter of fact for one turner is a revelation to another.

That's why it's so important to share, even if you think it's very basic... it might be new to someone else.

Re: Collet chuck video

#7

Brad Vietje

Re: Collet chuck video

Brad Vietje

Nice video, Alan. I never used a collet in the tailstock either, but it looks like a very nice method.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Collet chuck video

#8

Re: Collet chuck video

John Jordan

Stubby lathe can use a drawbar AND is self ejecting.

John

Re: Collet chuck video

#9

Alan Zenreich

Re: Collet chuck video

Alan Zenreich

John, that's good to hear. Does the drawbar move with the quill?

Re: Collet chuck video

#10

Bit like common sense?

Geoff Whaling

Bit like common sense? Some things are well known others are fringe items that few turners are aware of.

Re: Collet chuck video

#11

Re: Collet chuck video

David Walser

Thanks, Alan. I hadn't thought about whether using a collet would be a more accurate method for drilling holes than using a Jacobs chuck. Interesting.

Re: Collet chuck video

#12

Re: Collet chuck video

John Jordan

Alan, I'm not helping your quest for accurate information. The Stubby has a through hole and self eject as well, but the the screw does not follow the quill. A drawbar would only work to hold something stationary.

Sorry.

John

Re: Collet chuck video

#13

Re: Collet chuck video

John Jordan

Alan, I'm not helping your quest for accurate information. Its true the Stubby has a through hole and self eject as well, but the the screw does not follow the quill. A drawbar would only serve to hold something stationary.

Sorry. :O

John

Re: Collet chuck video

#14

Alan Zenreich

Re: Collet chuck video

Alan Zenreich

John,

That's typical of most self ejecting tailstocks... a stationary quill isn't of that much use in a boring/drilling operation.

So thanks for the update.

Re: Collet chuck video

#15

Re: Collet:  Who makes/sells these?? 


Re: Collet chuck video

#16

Re: Collet:  Who makes/sells these??

John Lucas

I buy mine from www.use-enco.com but you can get them from any metal supply house or Amazon. Grizzly also sells them. I watch for sales on metal working supplies and bought 6 in different sizes for $10 plus shipping. High quality American made ones cost considerably more.

Re: Collet chuck video

#17

Alan Zenreich

Re: Collet:  Who makes/sells these??

Alan Zenreich

I got mine from LittleMachineShop.com