Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

why it's nice to make your own tools

Posts

why it's nice to make your own tools

#1

why it's nice to make your own tools

John Lucas

I used to do this cut with scrapers. It's where you want to cut up to the inside of a foot to leave a shoulder and you need the tailstock support so it's in the way. Years ago when doing bowls I built this cutting tool from an allen wrench. It has a bevel and a 2 cutting surfaces, the top and left side. It lets me reach in an do a shear cut up to the corner of the foot. Saves a lot of sanding. As you can see in the second photo it has a bevel to ride to keep me from getting a catch.




Re: why it's nice to make your own tools

#2

Re: why it's nice to make your own tools

Dwight Rutherford

Great tip! Thanks

Re: why it's nice to make your own tools

#3

Dale Jablonski

Re: why it's nice to make your own tools

Dale Jablonski

John, how well does your tool keep an edge?

Re: why it's nice to make your own tools

#4

Re: why it's nice to make your own tools

John Lucas

Pretty well. I hardened it after I bent it. I made a Router plane using an Allen wrench and can't believe how well it holds an edge. It has to be razor sharp to work well and it just keeps on cutting.

For this tool I don't usually cut very much so I seldom have to sharpen it. In fact looking at the photo I do need to sharpen it but it still left a finish good enough I sanded it with 220.