Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Sfirri Inspired 2Axes, 2 Profiles Piece

Posts

Sfirri Inspired 2Axes, 2 Profiles Piece

#1

Sfirri Inspired 2Axes, 2 Profiles Piece

charlie belden

Been playing with Sfirri inspired 2 parallel axes, 2 profile human forms. After turning these three


I turned a very stylized version that had some interesting possibilities to explore sometime in the future


I then did this softer more flowing stylized version in what might be mahogany



All of these sketches were turned in 3/4 x 3/4 x 6 pen blanks so they don't use much wood and can be turned fairly quickly. Each was turned on just 2 PARALLEL AXES, each axis having its own profile.


Am putting together a web page and a YouTube video on how these are designed and then turned. Will post urls when that's done.

As usual, questions, comments and constructive criticism requested

Re: Sfirri Inspired 2Axes, 2 Profiles Piece

#2

Brad Vietje

Re: Sfirri Inspired 2Axes, 2 Profiles Piece

Brad Vietje

Cool!

I think I used to date the 3rd one down back in college -- I liked her a lot, but she dumped me :D

I'll keep an eye out for the additional info -- these look like a fun and challenging project.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Sfirri Inspired 2Axes, 2 Profiles Piece

#3

Re: Sfirri Inspired 2Axes, 2 Profiles Piece

Peter Rand

really cool Charlie - looks like great fun exploring - how caricature-istic can you get them?

Re: Sfirri Inspired 2Axes, 2 Profiles Piece

#4

Re: Sfirri Inspired 2Axes, 2 Profiles Piece

charlie belden

Give me a side view of the caricature you're after and I can develop a "front" profile and a "back" profile for the multi axis turning, along with how far apart the parallel axes need to be and a side view of what the results will look like. Assuming I can actually turn the profiles, and there are limitations to doing multi axis pieces in pen blanks, I, and you, can probably turn any caricature you can come up with.

You've seen this set of profiles for a "positive" and "negative" Elvis


The profile wouldn't be that hard to turn in a 3x3 blank - except for the pompedore (sp?) hair in front.

Re: Sfirri Inspired 2Axes, 2 Profiles Piece

#5

Re: Sfirri Inspired 2Axes, 2 Profiles Piece

Peter Rand

I can't open the pic you sent for some reason - I had no particular profile in mind and wanted to see what you would pick as a caricature :-) - big ass big boobs and big hair maybe LOL

Re: Sfirri Inspired 2Axes, 2 Profiles Piece

#6

Elvis Caricature - attempts 2

charlie belden


Re: Sfirri Inspired 2Axes, 2 Profiles Piece

#7

Re: Elvis Caricature - attempts 2

Peter Rand

YES!!!! great - prefer boobs - LOL

Re: Sfirri Inspired 2Axes, 2 Profiles Piece

#8

Re: Elvis Caricature - attempts 2

Don in Central Illinois

But Elvis didn't have boobs.

Re: Sfirri Inspired 2Axes, 2 Profiles Piece

#9

Re: Sfirri Inspired 2Axes, 2 Profiles Piece

Mark Sfirri

It looks like you're getting some good results. The third one is my favorite and the first one in second place. The middle one gets thin at the same spot on both axes, which makes the whole piece fragile there. You'll get cleaner cuts with a harder wood. It's a good idea to clamp the wood in both positions before doing any of the turning. Also, because of the football in cross section result, the wood should not be square, maybe try 1" X 1 3/8." Good luck.

Mark Sfirri

Re: Sfirri Inspired 2Axes, 2 Profiles Piece

#10

Ellis Walentine

Thanks, Mark

Ellis Walentine

Your comments are welcome here anytime. Thanks for stopping by.

Ellis