Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Oil for Vacuum Pump?

Posts

Oil for Vacuum Pump?

#1

Oil for Vacuum Pump?

John Kaner

New owner of a Blue-Point/Marvac GA-271A Vacuum Pump. Web searched to fingers hurt... The only label on pump is Blue-Point. Rest from Web. No available Manuals. Was possibly sold by Snap-On for Automotive Air Conditioning Evacuation. It was set-up for Vacuum Laminating and assembled from plans on the Web. Previous Owner had no information or spare oil. I was carrying it into the house and tilted it when I lost my grip. The oil that spilled from the vent was clear and odorless. Could this be Mineral Oil? Mess cleaned up easily with 409. Clothes came clean in wash. All we have is a Graingers. They sell a Mineral Oil based product for Vacuum Pumps. I have some bottles of Mineral Oil from Wal-Mart Pharmacy. States it's a Lubricant. Since I'm only going to use it for a vacuum chuck, will the Pharmacy Mineral Oil work?

Woodcentral is the best place for honest and correct answers. Thank you in advance and I appreciate you help.

Re: Oil for Vacuum Pump?

#2

Re: Oil for Vacuum Pump?

Bill Howatt

Did you see this?

http://www.marvacscientific.com/pg1.html

I would call the company mentioned and see if they can tell you about the oil required. I wouldn't take the chance on ruining the pump if the answer is available.

Bill

Re: Oil for Vacuum Pump?

#3

Thank you!

John Kaner

Thank you Bill. Good advice!

This time when I called, there was offers for a Bahama's cruise.... Last time it was an offer for Allstate Motor Club!

Re: Oil for Vacuum Pump?

#4

Re: Oil for Vacuum Pump? *LINK*

walta

I think this is what you are looking for.

You should be able to find the correct oil at your local HVAC supplier.

PS the oil should be changed after 12 hours of operation.

Walta


Oil Link

Re: Oil for Vacuum Pump?

#5

Thank you

John Kaner

Walta, thanks for the link!

Re: Oil for Vacuum Pump?

#6

Re: Thank you

Bill Turpin in WNC mountains

The vacuum pump oil sold by HVAC suppliers has a low vapor pressure. VP of the oil is the amount of vapor that comes off the oil constantly every day. This VP competes with the ability of the pump to pull a vacuum. This may not be a factor at the vacuum levels used on a lathe. Vacuum oil is more expensive than regular oil.

Re: Oil for Vacuum Pump?

#7

Re: Thank you

John Kaner

Thank you Bill.