Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Danish Oil Finish on dyed turnings

Posts

Danish Oil Finish on dyed turnings

#1

George Taylor

Danish Oil Finish on dyed turnings

George Taylor

I have been using a lot of Danish oil recently and I am happy with the sheen I am getting after multiple light wipe-on coats and then buffing after fulling cured. I have a number of small pieces I will be dyeing with Transtint colors cut with DNA. Does anyone know if there is any issue with this combination? Thanks

George

Re: Danish Oil Finish on dyed turnings

#2

Re: Danish Oil Finish on dyed turnings

don stephan

A tabletop I dyed with Transfast in water migrated through 3 or 4 coats of a shop mixed Danish oil - equal parts mineral spirits, boiled linseed oil, and P&L 38 gloss varnish. A damp paper towel was showing some of the dye stain. Took 4 or 5 additional coats of equal parts mineral spirits and P&L 38 (harder finish than the Danish oil) to finally seal in the dye stain. Experiment with some scrap first.

Re: Danish Oil Finish on dyed turnings

#3

it will turn everything yellow

GaryG in MD

The colors will be ruined. Danish oil yellows everything. ...GG