Finally got in a little shop time after nearly 3 months being too busy with life and work demands. This is spalted maple with curl in the grain and zone lines all over the piece. 14 inches high to the tip of the finial.
Mike........I have great respect for Keith Burns work, and I can assure you that in my thinking that him, nor his work was ever in the universe of my thinking when I made this piece!
In fact as I mentioned over on WTU, and on WOW, this was a salvage effort with the wood being in the condition it was in, and the fact that I had originally intended a walnut base with 3 feet, but due to a defect in the piece of walnut could not complete one of them. I even tried to use another piece of walnut with a different style of base [unglued] and I did not care for the look, so just decided to design on the fly and make the base taper down the curve to the bottom.
I think integrity is important, and if in any way Keith's work had influenced this piece, I would most gladly have given him credit for inspiration. If there was any influence, the title "Bucket with a Top Hat" came from some comment I heard from Curt Fuller some time back......I don't remember if he was referring to one of his forms or someone else's, but that term "bucket" came to my mind, and so I stuck the title "bucket with a top hat" on it.
I just wanted to set the record straight here........no copy whatsoever, just what came to me while the form was still on the lathe, and I had a disappointment with my intended 3 legged base from walnut.