at least for a while. I just completed these today (we had Thanksgiving last Saturday), and I just think a finish would completely change the look and feel. I thought about artist fixative, but this stock just has a completely different feel to it. No natural color left in the hard maple, just this washed out color and spalt lines. Sanded to 1000 Abralon and that gave it a nice sheen. Squat form is 5.5" diameter and 4" tall and the tall form is 5.5" diameter and 8.25" tall. Turning was pretty good, I'm thinking that being frozen was a nice benefit!
You're fortunate that the wood was still solid enough to give you that luster. Fixativ wouldn't necessarily change the look, but it would provide some protection if the pieces are to be handled, which I doubt.
I did Terry. Thomas Stegall from our club needed some fresh stock for his demo at SOFA, and our club. So, I called Brian. Pickin's was pretty slim, but I did pick up a couple of gems. Found some Bradford pear for Thomas, some Norway maple with great color for me, and just this one piece of spalted.
I agree with Ellis. Although Fixativ will change some woods typically on maple you won't even know you've sprayed it and it does provide protection. It can also be buffed up to a higher sheen if you wanted
Just a suggestion, Dick, but when I was at Ellsworth's studio years ago he had some spalted pieces on which he painted some oil coloring in between the spalt lines. That sure made things stand out nicely. I believe he used Waterlox but I see no reason another oil wouldn't work as well.
Dick, both are beautiful. I am also wondering how are you going to protect it from finger prints? Unless, you keep it in your own private collection and do not let any one touch them.
...wipe on and rub in coat of lacquer thinned with about 10% acetone. This acts as a sanding sealer or final finish that is nearly invisable, and doesn't show handling evidence. It also stabilizes any punky spots that might cause an irregular surface usually found in spalted woods.
BEAUTIES! Great shapes, and the spalt lines really help show the lovely forms.
Did you notice that you almost have Australia on the short one? COOL!
I left a White Ash HF bare because I really liked the look -- then someone picked it up in a gallery with a felt-tip marker in their hand, and left a neat little blue-black comma-shaped mark on the side of it, and set it back down. I eventually took it back and re-sanded it, and put some finish on for another go, and removed almost all the ink, so it didn't really show.
Might be a good idea to spray a little acrylic fixative on there if it will be touched -- could make a big difference if something discolors it.