Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Maple natural edge bowl

Posts

Maple natural edge bowl

#1

Dan Jechura

Maple natural edge bowl

Dan Jechura

Had this week off from work so I tried finishing some 15 bowls to get them out of the shop. it did not make a dent in the unfinished projects. This is a Ambrosia Maple bowl. 7 1/2 X 4 1/4 X 3/8 The shape is something I am playing with, hope it looks ok. Finished with Generals Finishes Salad bowl finish. Beal Buffed then waxed. Comments welcome, always trying to learn.

Happy Thanksgiving to all. And remember that this day really is for. And remember thouse that are no longer here on this earth.




Re: Maple natural edge bowl

#2

Dan Jechura

Typing tooo fast not a natural edge bowl. Sorry


Re: Maple natural edge bowl

#3

Re: Maple natural edge bowl

Phillip Medghalchi

Dan, the wood is beautiful and yo udid a nice job with the finish to keep it form turning yellow. the shape of the bowl on the top and the body is nice, the pedestal is little too big for the body and the proportion is off a little bit. I hope yo didn't mind me saying that.

Stay with the shape and try the 1/3 of the widest diam. rule before you take the tenon off.

I do it this way myself. I usually bring the piece in and put it on top of our entertainment cabinet which is little higher than my eye level so I can look at it from different angle, then if I like it and the proportion is right and my wife who has a good eye for forms says OK, I take it back to the shop and then the tenon comes off, then finished.

try this and I think you will like what you can see as your form and before you take the tenon off, which makes it very hard to mount it back on the lathe and correct anything you want to modify.

Re: Maple natural edge bowl

#4

Mike Stafford

What????????


Re: Maple natural edge bowl

#5

Re: What????????

Phillip Medghalchi

what?

Re: Maple natural edge bowl

#6

Mike Stafford

Re: What????????

Mike Stafford

You sound like some guy named Kami Salmasi. Any relation?

Re: Maple natural edge bowl

#7

Dan Jechura

Re: Maple natural edge bowl

Dan Jechura

Thank you for your comments. I will keep them in mind.

Re: Maple natural edge bowl

#8

Brad Vietje

Re: Maple natural edge bowl

Brad Vietje

Nice job, Dan. I like the shape of the bowl, but would probably have carried the curve in a bit more for a smaller foot. If you have more of these, it would be good to make a series, and experiment with the diameter and height of the base, but I'd say you nailed the form on the upper part.

Safe spinning,

Brad Vietje

Newbury, VT