Just finished teaching step-daughter & grand-daughter the art of making apple pies using my mothers recipe for the dough. (the best). after we finished I realized we use glass bowls and store bought rolling pen. that I will have to correct before Christmas. Question has anyone made a pie pan and used in the oven? it would seem that it would probably crack.
Re: OT taught s-daughter & G-daughter to make pies
Re: OT taught s-daughter & G-daughter to make pies
Barry Irby
I have several rolling pins I made. I am not much of a baker, but I am ready, just in case there is an intruder.
No reason you could not make a pie plate. Spin one. Easy enough out a sheet of aluminum. I made several spun shapes that could have been pie tins. Mine were copper and were liners for plant stands. I turned a dish shaped piece of hard wood and nailed the copper securely, VERY SECURELY, to the front and then use the round head of a very large carriage bolt to press the copper into the form while it was spinning. Look up metal spinning on YouTube. I invented my method out of the whole cloth and made it much harder than it needed to be. Probably better to turn the male version of the form and spin the metal onto it.
You could turn a matching wooden bowl and then slide the pie into it after it was baked.
Re: OT taught s-daughter & G-daughter to make pies
Re: OT taught s-daughter & G-daughter to make pies
Barry Rockwell
Mike, I turned a "pie locker" to hold and serve an already cooked pie based on a design by Roger Zimmerman a few years ago. Just sold it to a friend to give his wife for Christmas. It is black walnut, cottonwood top, bloodwood cherry, and East Indian rosewood stem. Tried to upload the picture but the file is too big. I'll email the picture to you.
Re: OT taught s-daughter & G-daughter to make pies