Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

My First YouTube Turning Video Post *LINK*

Posts

My First YouTube Turning Video Post *LINK*

#1

Brad Vietje

My First YouTube Turning Video Post *LINK*

Brad Vietje

The other day I stumbled upon a fellow in Texas doing something I thought was stoooopid-dangerous -- see knucklehead YouTube video here: https://www.youtube.com/watch?v=xs9qdq-578Y

After a spirited exchange, complete with insults and all, I got out my digital camera and tripod, and shot a few videos showing the guy he was blowing smoke. My response video is found here:

https://www.youtube.com/watch?v=x6eph8m9wz8

I could really use some better lighting, and wish I had shaved first, but hey -- I was just taking a break from stacking firewood, so it'll have to do. I was surprised that the video and sound quality were as good as they were, and I'm sure I can make improvements for future videos. The camera batteries don't last very long at 24 degrees, and I tend to sniffle in the cold, so it will be good to get a real shop someday.

I've wanted to shoot instructional videos for some time (ideally after I move the lathe to a heated space), so it was good to be prodded into trying it by a knucklehead with serious attitude. Please let me know what you think.

Now that I see how long it takes to upload videos -- even after compression -- I will aim for shorter segments in the future.

Safe spinning,

Brad Vietje

Newbury, VT


Bowl Blank:  Square to Round on a Wood Lathe

Re: My First YouTube Turning Video Post *LINK*

#2

Re: My First YouTube Turning Video Post

robo hippy

Pretty good Brad. Now where the heck is part 2????? I left the comment on the other clip that it is way faster to use lathe tools than the chop saw. Just because it can be done, doesn't mean it should be done.

I seem to remember some thing about some one mounting a huge piece on a DVR maybe, and using a chainsaw for the roughing it to round.

robo hippy

Re: My First YouTube Turning Video Post *LINK*

#3

Brad Vietje

Coming... it's slow to upload!


Re: My First YouTube Turning Video Post *LINK*

#4

Brad Vietje

3 Posts are now up.

Brad Vietje

Thanks for watching, Reed. I have lots to learn about making videos, but I have lots of turning/teaching experience. I need to find a better way to mount the camera than splaying a tripod over the bed -- its right in the way for long-handled tools!

You and John have some really nice videos, and I'll see what I can to improve the lighting, sound & content.

Anyway, I suppose I made my point -- sticking a miter saw on a lathe is just not needed, and mighty dangerous-looking! AND, no where's near as fast as using a lathe.

Safe spinning,

Brad Vietje

Newbury, VT

Re: My First YouTube Turning Video Post *LINK*

#5

Re: My First YouTube Turning Video Post

Guy Bratt

I remember that video Reed. The guy was making huge vases about 4-5 feet tall and 2 feet in diameter. He used the chain saw to rough all the segmented corners off before he started with his gouges. He made several. I believe there was a better way to get to rough round.

As said before " Just because you can, doesn't mean you should. "

Re: My First YouTube Turning Video Post *LINK*

#6

Re: My First YouTube Turning Video Post

Phillip Medghalchi

Brad, I watched that video form this guy in Tx. Sorry to tell you this it looks like only in TX we have these people making weird stuff. First of all I am not sure how he mounted that miter saw going side ways. then you noticed that guard got caught to the wood and snapped upwards. From what I saw, I hope that this guy will not end up in ER with his arm cut off, the way he is going it's only a matter of time before that happens. that saw can get caught and Well, yo can picture the rest.

You thought this one was bad, there is a girl in fort worth named "April Wilkerson"

she shows her videos with all the safety violations that there are, and it's one of those things that is not if, is when it;g going to happen. she never puts her hair up and wears tank top to cut on the table saw, which on one her videos she got so close to the table saw blade I had to stop and turn it off. Well, one thing I ahve learned that yo can not fix st.......pid.

Re: My First YouTube Turning Video Post *LINK*

#7

Good work, Brad

GaryG in MD

It's nice to see things done right. ...GG

Re: My First YouTube Turning Video Post *LINK*

#8

Re: My First YouTube Turning Video Post

Phillip Medghalchi

Brad, very nice videos for the first time and teaching that guy how it's done correctly, we got to see you at least in action and very good job of explaining. Your sound was very good end I who have hearing problem had to crank the volume down to a level that would be clear and I couldn't believe that it was very close to silencing it. the video quality was good, I think if you watch capt'n Eddie's video I don't know which one but he has articulating arms form the ceiling which allows him to move the camera where is the best angle and also he has a screen in front of him that he can see what the audience can see, and a remote. You can ask Reed too what he uses or if he has someone helping him to take the videos. for the first videos you did excellent. Great job.

Re: My First YouTube Turning Video Post *LINK*

#9

Re: My First YouTube Turning Video Post

John Lucas

Excellent. There is a video out there where they guy uses a router also. The funny thing is I could have turned 10 bowls in the time it takes to rig up those jigs to move the router or the miter saw. Not to mention the dangers.

You did a very good job of explaining the side grain cutting technique, and why it should be used.

As for the tripod, that's always a pain. I'm lucky enough to have a boom arm or they call it a side arm attachment for my tripod. That allows me to stick the tripod behind the lathe or in some cases on the end and swing the camera over the bed. Still hard to keep yourself out of the camera's way or to get the camera angles right. If your going to do many turning videos it would be a worthwhile investment. Mine was designed for my tripod but I think there are some aftermarket side arm attachments.

Lighting can also be challenging. For me the hard part is placement because my lathe is angles just a short ways from the wall and it's hard to get light back there. I have 2 smaller lights that I use at the lathe all the time. I installed daylight balanced bulbs in those and then use daylight balanced bulbs in my soft box and 12" reflector light. Usually I can use the small lights to light the detail shots and then fill in with the soft box and/or 12" reflector light for the broader shots of me, etc.

Your voice came out very clear and your explanation for your techniques was excellent.

Re: My First YouTube Turning Video Post *LINK*

#10

One other tip

John Lucas

You probably already figured this out but using a relatively long lens helps get the camera out of the way. I move the camera out toward the end of the lathe and zoom in pretty close. It's a pain to start and stop the camera etc but it helps get it out of the way when turning.

When I have time I'm going to work on some 2 camera techniques where I can do a picture in picture set up. I want a close up showing how the tool is cutting and how the edge is rotated, and then a longer view showing how the handle is moved to control the cut.

I know I'm a wimp but it's too cold in my shop to do much and the outside temp is only 22. Yea I know you guys in the north are all laughing but I'll take my southern heat any day.

So I guess I better shut up, go turn on the heat in the shop, head to the gym for an hour or so and then come back and try to get something done.

Re: My First YouTube Turning Video Post *LINK*

#11

Brad Vietje

Re: One other tip

Brad Vietje

Thanks for the feedback, John! I have a big 'ole video camera tripod in storage, and I may build a parallelogram arm for it to reach out over the lathe. It will double as a mount for my big star-gazing binoculars 8)

We may suffer through the cold up here, and even enjoy playing in the snow, but believe me, I don't like turning in the cold! I hope to have a heated shop space soon, but I've been saying that for about 3 years now! Just need to finish the interior details of the new house to keep SWMBO happy, and then I can work on setting up shop in the old place.... someday.

Safe spinning,

Brad Vietje

Newbury, VT

Re: My First YouTube Turning Video Post *LINK*

#12

OUCH..

Mike Potts

Brad, I had to turn the others guys video off, part way through. Any tool can be dangerous, but to use a power tool for something other than what it was meant for is insane. It's a very painful and shocking experience to see your hand laying on the floor, this I know form personal experience, I hope that guy does't find out the hard way. But of course I often wonder why people use a band saw to make their bowl blanks round. Just as you've proven it is so much quicker to put it balanced between centers and turn them round on the lathe. Very nice video Brad

Keep it safe out there

Mike

Re: My First YouTube Turning Video Post *LINK*

#13

Brad Vietje

Re: OUCH..

Brad Vietje

Wow -- that's an amazing story, Mike. Are you now one-handed, or were they able to re-attach it? Maybe you should leave that comment for Mr. Blue MacGuyver -- he needs a little dose of humility.

Safe spinning,

Brad Vietje

Newbury, VT

Re: My First YouTube Turning Video Post *LINK*

#14

Re: OUCH..

Mike Potts

No Brad they where able to reattach it, then 8 follow up surgeries to try an get it to function properly. but i have very little feeling in my hand the thumb doesn't do the opposing thing and the finger don't work on an individual basis, and it's always cold. but if you read my profile life does go on.

Mike

Re: My First YouTube Turning Video Post *LINK*

#15

Steven Antonucci

I will fight you to the death with a head full of

steven antonucci

stupid...

As Yogi Berra you to say:

You can't tell him something he doesn't already know...

S

Re: My First YouTube Turning Video Post *LINK*

#16

Brad Vietje

Re: I will fight you to the death with a head full

Brad Vietje

Steve -- stay with us ! Don't let the forces of darkness suck you in...! Besides, he's got stooooopid pretty well covered, and doesn't really need your help ;)

Safe spinning,

Brad Vietje

Newbury, VT

Re: My First YouTube Turning Video Post *LINK*

#17

Re: One other tip

Wally Dickerman

Great job Brad. Well done. It's amazing what some people will do on Utube and look very stupid doing it.

Brad, it pains me to see you turning in that heavy jacket in a 24 degree shop. Here in sunny Arizona I'll be in my shirtsleeves in my shop today. Temps in the 70's

Re: My First YouTube Turning Video Post *LINK*

#18

Brad Vietje

Re: One other tip

Brad Vietje

It's OK, Wally -- you're 5 - 6 years older than me, so you should have a nice, warm shop :D

2" more snow today, and lows in the teens tonight -- but this is Vermont, and it's mid-November. Heat will be coming along sometime; I'll tough it out till then.

Safe spinning,

Brad Vietje

Newbury, VT

Re: My First YouTube Turning Video Post *LINK*

#19

It will be in the teens in Tennessee tonight

John Lucas

The little heater in my shop looks at me shivering and say's Yea Right Buddy whata you think I am.

Re: My First YouTube Turning Video Post *LINK*

#20

Re: It will be in the teens in Tennessee tonight

Mike Potts

John have you ever thought about a wood burner for your shop. we'll be single digits tonight and high in teens tomorrow. I have a wood burner in my shop not only does it keep it toasty warm, but a great way to get rid of cut offs, scrape and wood shavings. keeps the utility bills at a minimum.

stay warm

Mike

P.S.

looking forward to your pendant video

Re: My First YouTube Turning Video Post *LINK*

#21

Steven Antonucci

Gloating about the heating zone in my shop!


Re: My First YouTube Turning Video Post *LINK*

#22

Insurance won't let me

John Lucas

They seem to think there's some sort of fire hazard in a wood shop. Go figure. I don't have room for one anyway. I need at least 3 feet around it to be safe and there's no where in my shop where you have that much room. I can barely get the clearance I need for my Kerosene stove.

Re: My First YouTube Turning Video Post *LINK*

#23

Re: Insurance won't let me

Stuart Johnson

John, I've heard Kerosene heater cause rusting problems. Have you had any issues? I use a propane radiant heater that works if you standing in front of it but isn't much good if you are moving around the shop.

Re: My First YouTube Turning Video Post *LINK*

#24

Re: Insurance won't let me

John Lucas

Not that I can tell. I've been using it for years.

Re: My First YouTube Turning Video Post *LINK*

#25

Re: OUCH..

Geoff Whaling

Nice work on the clip Brad. Not that it will change the guys mind but at least it is one more good clip out there that hopefully will inspire others to follow your lead.

It’s not nice to see a hand or digits missing! I grew up pretty much accepting my fathers cousin missing his lower arm & hand (stevedoring accident); an uncle missing a thumb (army accident); a neighbour missing all fingers & thumb on one hand (crushed off in a boiler making accident); and a friend of the family who took off all fingers and a thumb on one hand using a dewalt docking saw to rip stock; and many other "workplace" injuries. As kids we saw these things happen to people we knew. "Accidents" that should never have happened.

Fortunately we now have workplace legislation to weed out some of the rouge operators, but that doesn't apply in hobby shops/shed.

If you want to stack the odds against yourself performing risky operations contrary to manufactures advice and popular "safe techniques" like this guy does using a power saw & lathe in combo then it’s only a matter of time before an "accident" happens. Hopefully he will get a hell of a fright before he injures himself badly.