Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Muse Abandonment Issue

Posts

Muse Abandonment Issue

#1

Muse Abandonment Issue

charlie belden

- or it could be the turner's equivalent of Writer's Block, but I can't think of something interesting to turn.

I've gone through my dry wood stash hoping to find something inspiring. I've looked at the logettes stacked along the fence thinking I'd see something that would be an interesting turning. I've even swept up most of the chips and eliminated a few if the various piles of stuff that accumulate on any and all horizontal surfaces above the shop floor. If this keeps up I'm gonna have to clean the bathroom and may even have to go through my old T-shirts and maybe, just maybe - throw some away. If all else fails I'll have to sharpen all the gouges, chisels and hand plane irons. Or - I can search for my double backed tape and finally try that pendant jig I got three or four years ago.

Muse. Muse. Where ARE you?!

What do YOU do when your motivation to turn seems to dry up?

Re: Muse Abandonment Issue

#2

Re: Muse Abandonment Issue

Joe Herrmann

I feel your pain Charlie. I should be in the shop doing something but can't seem to get motivated either.

Re: Muse Abandonment Issue

#3

Ditto


Re: Muse Abandonment Issue

#4

Re: Ditto

Ron Bauer

I can't help about what to do when the ideas are in a drought. But what I try to do is when they are in a flood I try to write down and sketch in a note book stuff that I can't get to right then. When I hit a blank I take out the book and take a look and maybe there is something to get me off the snide. Thats of course if I remember. Ron.

Re: Muse Abandonment Issue

#5

Re: Muse Abandonment Issue

Stuart Johnson

I can always spend time (weeks) finishing up some of the stuff I've started and then lost interest in when I saw something else to try.

Re: Muse Abandonment Issue

#6

Re: Muse Abandonment Issue

Sean Troy

Best time to clean shop and sharpen tools.

Re: Muse Abandonment Issue

#7

Re: Muse Abandonment Issue

Vince Welch

With the holidays just around the corner I have been turning ornaments. Small and fun. Just a thought.

Re: Muse Abandonment Issue

#8

Steven Antonucci

A clean shop is a terrible thing!


Re: Muse Abandonment Issue

#10

Lyle Jamieson

Re: Muse Abandonment Issue

Lyle Jamieson

Look at what you last enjoyed turning. Take that piece and sit it on the table, have a seat and look at it a while. You will see that there is something you can change to make it better. Small changes can make to sizzle. Do a series of the same type of turning. You will refine your tool control and develop a design eye from a series. After you turn three or four of the same thing you are starting to pout your passion into the shape. Creativity can be in very small increments. It can be the difference between mediocre and spectacular.

Re: Muse Abandonment Issue

#11

Re: Muse Abandonment Issue

Gary clarke

Try segmenting, if you get hooked there is always something to improve on or different to do. Only problem is not enough time or energy to spend in the shop.😜

Re: Muse Abandonment Issue

#12

Re: Muse Abandonment Issue

John Lucas

Charlie I'm going through that right now. After being away from the lathe for almost 2 months it seems I'm behind on almost everything I need to do (not just in my shop) Consequently I'm making smaller things to keep me occupied but they aren't what I really want to be making.

I've made some good sketches but these projects will take a while once started and right now I don't have the time so I'm kind of frustrated. Oh well it will work it self out. I just have to get out to the shop and actually do something, anything (other than freeze which is kind of hard to do in my shop when the weather drops like it will this week)

Which reminds me, I need to quit playing on the computer and get in the shop. See ya later.

Re: Muse Abandonment Issue

#13

Fickle

Mark Mandell - Gone Round In New Jersey

bitch that she is, the worst thing to do is chase after her; the "muse" that is :D

She's still there but is ignoring you. Well, two can play THAT game!

So, whip out the Round Toit list and get going. Chances are, there's something on it that messing with your communication.

If you really clean the shop you might just find that idea you started 14 years ago and then forgot because it got buried, plus the shop will be a more pleasant playground.

Putting the tools in shape can spark an idea to use them on.

When those are done, beat-feet out of the shop and go to some galleries and museums and just walk around, look at, and try to analyze other people's stuff in person (NOT in pictures); take a notebook.

Try out 10 new kitchen recipes.

If you make a point of ignoring her long enough, she will turn around and bite you as the muse will tolerate being ignored for only so long. This is, after all, a control game.

;)

Re: Muse Abandonment Issue

#14

Disagree

Mark Mandell - Gone Round In New Jersey

a clean shop mandates making a whole new mess! :D

Re: Muse Abandonment Issue

#15

Brad Vietje

Re: Fickle

Brad Vietje

Well put!

I got an interesting idea the other day while walking the dog, and another while on a solar site visit. You just never know when an idea will strike you, and knowing Charlie's amazing creativity through his posts, he'll be making 3-D animated models again in no time.

B'sides, I have a growing list of round tuits, and SWMBO really would like little luxuries like lights in the closets, etc..., etc... a few days away from trying, and your muse will be tapping you on the shoulder again like Tinkerbell and her little wand.

Safe spinning,

Brad Vietje

Newbury, VT