Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Bradford Pear Bowl

Posts

Bradford Pear Bowl

#1

Bradford Pear Bowl

Phillip Medghalchi

This is Bradford pear decorative bowl I made for my friend whom I got all my logs form as a token of appreciation.

Name: Bradford Pear (D)

Diam.: ≈ Rim 12", Belly 11 ¼" W x H x 4 ¼” D

Detail: Slightly spalted, more evidence inside , this is being gifted to friend whom I got all my Bradford Pear logs from. Made around March 2013, way before taking Jaime Donaldson's class. Of course the recent works are of much better quality since the class was taken.

Finish: All Lacquer

Suggested use: Decorative purposes

Note: Not a food safe article

C&C welcomed


Re: Bradford Pear Bowl

#2

Re: Bradford Pear Bowl

Don in Central Illinois

Very nice. I like the shape.

Re: Bradford Pear Bowl

#3

Re: Bradford Pear Bowl

Phillip Medghalchi

Thank you Don. this is my favorite and I am trying to find a way to make a template from it and copy it on some other designs, but haven't find any profile duplicator yet that will accommodate the size and the curve. i guess my pictures have to do it for now.

Re: Bradford Pear Bowl

#4

Re: Bradford Pear Bowl

RCH

You just have to use a profile gauge, take off segments of the outside profile, and combine them. It's what I've done over the course of 40 years of drawing archaeological pottery at 1:1 -- I have done it on things up to 3 feet in diameter and 4-5 feet tall, using profile gauge devices no more than 6" wide. It takes practice, but it can be done. I've done thousands of drawings that way in my career, from the very large down to vessels 1" in diameter.

Some profile gauges are better than others; my favorite is about 40 years old. Most of the current ones are cheap and the pins used to take off the profile are much heavier than desirable -- too few pins per inch. Mine has perhaps 15-20 pins per inch. I do have a Japanese profile gauge which uses slivers of bamboo for the 'pins' -- literally hundreds in about 6-7" width. It was a gift from Japanese archaeologists years ago, and I've never been able to bring myself to use it on pottery -- it is a work of art (and apparently expensive). Too beautiful. Maybe if more of the pottery I drew were finer --

Re: Bradford Pear Bowl

#5

Re: Bradford Pear Bowl

RCH

Also called contour or copy gauge

Re: Bradford Pear Bowl

#6

Re: Bradford Pear Bowl

john Veerkamp

Lacquer when cured/dry is food safe. It is frequently used in mass produced food use items.

Re: Bradford Pear Bowl

#7

Re: Bradford Pear Bowl

Phillip Medghalchi

I apologize for not knowing your first name. RCH ( hope you do not mind), you wrote

"You just have to use a profile gauge, take off segments of the outside profile, and combine them"

I am not sure if I understand what you meant by taking off the outside profiles.

I have the one made by national ( which is not that deep in depth) then I bought the new ones that you can find at lowe's or Home depot. the pins are not deep enough to follow the curve. Then I tried to do what you mentioned like trying to take segments of the curves and then paste them together to com up with the whole profile, I had trouble figuring out point of reference to put the profiles together. (I hope I explained it right) Like when you try to take a profile of a molding then on tho right side of the profile gauge you have a point of reference that you can go by to put it on another piece of wood or the other molding and trace the profile. The tins on mine do not even touch the bottom of this bowl, yet alone trying to copy the curvature.

I am sure if I watch you how you did it for your profession then I would embarrass myself not figuring it out.

I have even Googled it and try to find one with longer tins, and no luck.

I would love to see a pic. of your Japanese profile gauge.

Re: Bradford Pear Bowl

#8

Re: Bradford Pear Bowl

Phillip Medghalchi

John, I didn't think it would hold up if one uses it to put salads like potato slad, and he french olive salad 9 which my Mom used to make) that they use acids like vinegar or lemon juice in it. I had few of my lacquer finished pieces that got ruined when they got wet and I have to refinish them. Unless, the type you are using is better than Deft or Mohawk brand pre-catalyzed lacquer. I have to figure it out how to do it.

I have called Deft brand company and they advised against suing it on items that are crafted for food use.

i am interested to learn form you. I think we have had another thread that this matter was discussed in detail.

Re: Bradford Pear Bowl

#9

Re: Bradford Pear Bowl

Rum

Nice, I love the rim profile on this one, it gives it a sort of "flying" feeling.

Re: Bradford Pear Bowl

#10

Re: Bradford Pear Bowl

Phillip Medghalchi

Rum, thank you, these pic.s are not doing the bowl justice. I left my camera in LA inlast trio and have to wait until my daughter brings it back for the Holidays. I took this with my I phone 6 and still struggling to get the hang of it. In person this is one my best and favorite piece I have done so far.