Don't want another trip to emergency
Geoff Whaling
Now that doesn't sound good. Hope you are OK.
I use a variety of simple sleds to hold work pieces & logs for cross cutting or ripping.
"Rip sled for band saw" or "cross cut sled for band saw" searches will find plenty of examples in Google.
One of the most dangerous operations cutting round logs on the band saw is when a log section is stood on its end and the diameter trimmed so the band is effectively cutting in rip mode. It is definitely not recommended but turners do it and I have seen some very nasty finger & hand injuries from this practice.
Generally severe hand injuries from band saws occur as the cut is commenced; when the band unintentionally exits the wood early; at the end of the cut as the band advances unexpectedly; or due to the work piece (log or blank) moving unexpectedly or failing (splitting).
Simple controls like using a sled to secure the work piece, removing loose bark etc, keep hands and fingers well away from the band and also prevent damage to expensive band saw blades.