Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Turning a Rosette *LINK*

Posts

Turning a Rosette *LINK*

#1

Turning a Rosette *LINK*

John Lucas

Well it took the entire day but it's finally up on Youtube Took 30 minutes to actually shoot. Took about 30 minutes to find all the accessories for the video camera and get it working. Another 30 minutes looking for the proper cables to hook up my new (to me) microphone. Then after the video was done took about 25 minutes to download and then another 20 minutes or so to relearn all I had forgotten about editing. ( I didn't edit much of anything because I need to reread all that stuff )

Then I couldn't find the cord to go from the camera to the computer. When I did of course it was in a very logical (at the time) place.

That was the easy part. Been fighting Google and Youtube all afternoon. Seems I had accounts that were started a very long time ago. Of course who's going to remember a password or account name that far back. Of course you can't talk to a human that would have probably solved the problem in 30 seconds. Anyway I finally got through all the BS and it's up. Hope it's useful to someone.

I will be trying more videos in the future so if you need to see something give me a suggestion or two.


https://www.youtube.com/watch?v=D_Jc43ncgiI&feature=youtu.be

Re: Turning a Rosette *LINK*

#2

Re: Turning a Rosette

Don in Central Illinois

Again, another excellent video. Thanks.

Re: Turning a Rosette *LINK*

#3

Re: Turning a Rosette

Sergio

That is real nice video. Thanks.

Re: Turning a Rosette *LINK*

#4

Re: Turning a Rosette

Mike Potts

Nice video John, went to your regular u-tube channel first, this video wasn't there. I guess that's what you where talking about the out dated stuff. your next video should be the off center pedants, my wife makes jewelry and I would like to use some of the scraps I've been saving. I'm sure that would make her happy.

Thanks

Mike

Re: Turning a Rosette *LINK*

#5

Re: Turning a Rosette

John Lucas

Yea I'm going to try and figure out how to somehow get access to my old channel. I can't even find the Rosette video if I go to youtube and do a search. gotta work on that. I can't find some of my old videos by going to the john60lucas channel and looking. that sucks.

I will try to do a pendant video and one on tool rest height. Probably when I get back from my Arkansas, Texas trip.

Re: Turning a Rosette *LINK*

#6

Re: Turning a Rosette

robo hippy

I may have to try one of these, even though I don't need any. While looking at it, I couldn't help but think that the fluteless gouges could work really well for a lot of the cuts. Rather than the skew for the finish cut in the parting tool slot, I would use a flutelss gouge that I have sharpened like a detail gouge.

robo hippy

Re: Turning a Rosette *LINK*

#7

Re: Turning a Rosette

John Lucas

Well you could. I could also use my detail gouge. However my skew is slightly narrower and has a more acute cutting edge so it does a better job of doing that cut. The toe of the skew will reach into some really tight places.

Re: Turning a Rosette *LINK*

#8

Re: Turning a Rosette

robo hippy

Me and skew chisels....... I really should learn to use one some time. I know just enough to do okay, but don't use them often enough to really be comfortable with them..

robo hippy

Re: Turning a Rosette *LINK*

#9

Another excellent video !

Don Orr

Well done-great camera angle, tool visibility, explanation, lighting, and audio is clear. Comparing the scraping vs. cutting is a great example as well.

Nicely done as always-thanks. I'll be referencing your videos, and Lyle's, for an upcoming beginner class. I think they are easily the best available. Short, easy to comprehend bits of specific techniques.

Re: Turning a Rosette *LINK*

#10

Re: Another excellent video !

John Stegall

+++ on the excellence of your instruction. Maybe a hack like me can turn one of those.

John