Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Celtic knot in 10 minutes *LINK*

Posts

Celtic knot in 10 minutes *LINK*

#1

Celtic knot in 10 minutes *LINK*

John Lucas

OK it's pretty good. I like his technique although it can get tricky getting the wood to the bottom of the cut and if your insert pieces aren't the exact thickness you can get glue gaps. However it works. I still use the cut completely apart method and use titebond 11 and let is sit overnight. slower but very good glue joints.

I do have a problem with his free hand bandsaw method. I realize those are pretty thin pieces and cut easily but all it takes is a millisecond for the saw to grab and you could get hurt. The much safer method would be to put one end down on the saw table so you have some support. then hold the other end far away from the blade. The wood being supported on the table would reduce the likely hood of a catch and with your hands well out of the way would reduce the chance of damage.

The problem with a bandsaw is it can seem safe. Kind of like "it seemed like a good idea at the time".

I frequently use the Sam Maloof way of free hand carving on the bandsaw. It looks dangerous and it can be. If you follow the rules I put above which is always keep the wood supported on the table at or near the blade, and always always keep your hands well away from blade, you should be safe.


https://www.youtube.com/watch?v=UwK6n3iSyh0

Re: Celtic knot in 10 minutes *LINK*

#2

Re: Celtic knot in 10 minutes

Dick Coers

With his technique using the miter box, the blank will have to be oversized. He will have gaps at the bottom of the groove because of the arc of the blade. I'd also bet there are slight gaps on the sides of the cut considering how easily the inserts slid in.

Re: Celtic knot in 10 minutes *LINK*

#3

Re: Celtic knot in 10 minutes

Ron Bauer

Is there a tube video, book, or other reference on how to make a proper (like you guys are doing) celtic knot. Since others have figured it out there is no need for me to re-invent the wheel. I really like the look of the finished product and can envision many projects that could incorporate the visual. I do strive for (but don't always achieve) impeccable glue ups when I do that sort of thing. TIA. Ron.

Re: Celtic knot in 10 minutes *LINK*

#4

Just do a google search

John Lucas

There are tons of references. My preference is for completely cutting the wood through. I get tighter joints but it requires a lot more time, some serious clamping and even a right angle glue jig. I tried his method of not cutting all the way through and had occasional failures where there were tiny gaps and like was mentioned before you have to use extra large pieces of wood because you will turn away those uncut areas.

I've never really experimented with angles. I've seen everything from 30 to 60 degrees. I've always used 30 which works out well for Christmas ornaments and wine stoppers.

I've also always wanted to try overlapping 2 celtic knots. One of these days I'll have time and give it a try.