Sad story... good ending
Skip Beardsley
When we moved to Maine I replaced many of my larger tools, one of which was a new compressor from Campbell Hausfeld. Two months after the warranty expired the compressor died. I called CH and was advised the machine was out of warrantee and they would not do anything. After a trip to the local service center, I was advised the pressure switch failed and would cost about half the cost to the compressor to repair. I called CH back and after much conversation they agreed to pay for the evaluation and send me a switch, for me to install, which they did. After only a week of proper operation, it died again. This time the service center advised the overload mechanism, which is part of the motor assembly was defective and would cost a hundred and fifty dollars to fix.
Needless to say, I made another call to CH at which point they offered to send me a new motor. I did not feel as though I wanted to do that and explained I was willing to do the switch, but did not feel qualified to replace the motor. I agreed to pay the service center their charges to look at the machine and CH has sent me a new unit. They certainly could have walked away from the entire affair saying it was no longer covered. They didn't for which I am grateful. It was nice to know that they did recognize they had produced a less than satisfactory product and took care of making it right. It sure is nice to know they stand behind their products and that is why I am sharing my experience with the members of this forum. I often see posts asking for information about products and am happy to relay my experience which Campbell Hausfeld.
Ellis.... please let me know if this should mot be posted here and feel free to take it down, if that is the case.
Skip



